Los Angeles

Research Article Open Access

Synthesis and performance of La0.5Sr0.5CoO3 cathode for low and intermediate temperature solid oxide fuel cells

 

 

Baijnath, Pankaj Kumar Tiwari, Suddhasatwa Basu*

 

Department of Chemical Engineering, Indian Institute of Technology Delhi, New Delhi 110016, India

Adv. Mater. Proc., 2018, 3 (2), 118-224

DOI: 10.5185/amp.2018/895

Publication Date (Web):05 February 2018

Copyright © IAAM-VBRI Press

Abstract


Abstract

In the present work, different synthesis methods i.e., sol-gel method, glycine-nitrate method and solid state route have been used to synthesize lanthanum strontium cobaltite (LSCO), which is utilized as cathode in low and intermediate temperature solid oxide fuel cell (SOFC). Calcination temperature for LSCO has been determined by TGA. XRD, SEM, EDX and TEM have been used to assess the phase purity, crystallite size, morphology, distribution of constituent elements and particle size of synthesized LSCO material. Two-probe AC conductivity method has been used to calculate the ionic conductivity of LSCO in air environment between 400-800°C. LSCO synthesized by sol-gel method provided highest ionic conductivity of 0.42 S/cm at 700°C and lowest activation energy of 31.60 kJ/mol between 500 to 700 °C among all the methods. LSCO synthesized by sol-gel method gives lowest area specific resistance (ASR) of 3.52 Ω cm2 at 800°C for half-cell (LSCO/YDC). High ionic conductivity and low polarization resistance established LSCO synthesized by sol-gel method, as the potential cathode material. Copyright © 2018 VBRI Press.

Keywords


SOFC; LSCO; cathode material; method of preparation; area specific resistance.