November, 2018
Volume 9, Issue 11, Pages 748-830, November 2018
About Cover
Cover page describe the Typical fracture surface of nuclear graphite blocks after irradiation (cracks occur during reactor operation). This picture Summarize the Fractographic studies of GR-280 nuclear graphite after irradiation up to neutron fluence above the turnaround dose (with a decrease in of the mechanical properties to the values close to the initial one after primary radiation-induced increase) showed along with the presence of transcrystalline fracture, appearance of intercrystalline fracture regions along the “filler-binder” type boundaries.
Synthesis and characterization of pure BiFeO3 using various complexing agents by Sol-gel method
Balesh Kumar Vashisth, Jarnail S. Bangruwa, S. P. Gairola and Vivek Verma
Volume 9, Issue 11, Pages 805-810, Year 2018
Publication Date (Web): Jul 25, 2018
DOI: 10.5185/amlett.2018.2173
Naphthol bis-indole derivative as an anode material for aqueous rechargeable lithium ion battery
R. Anil Kumar, R. Vijeth Shetty, G. S.Suresh, K. M. Mahadevan
Volume 9, Issue 11, Pages 823-830, Year 2018
Publication Date (Web): Jul 25, 2018
DOI: 10.5185/amlett.2018.2007
Staking lay-up effect on dynamic compression behaviour of e-glass/epoxy composite materials: experimental and numerical investigation
Mostapha Tarfaoui, Mourad Nachtane
Volume 9, Issue 11, Pages 816-822, Year 2018
Publication Date (Web): Jul 25, 2018
DOI: 10.5185/amlett.2018.2060
Effect of sulfurization temperature on optical and compositional properties of sputtered Zn(O,S) thin films
K.S. Gour, A.K. Yadav, Rahul Kumar, J.S. Tawale and V.N. Singh
Volume 9, Issue 11, Pages 811-815, Year 2018
Publication Date (Web): Jul 25, 2018
DOI: 10.5185/amlett.2018.2125
Polycaprolactone/organoclay biodegradable nanocomposites: dissimilar tendencies of different clay modifiers
Romina P. Ollier, Matias R. Lanfranconi, Vera A. Alvarez, Leandro N. Ludueña
Volume 9, Issue 11, Pages 796-804, Year 2018
Publication Date (Web): Jul 25, 2018
DOI: 10.5185/amlett.2018.1828
Structural performance of severely damaged reinforced concrete beams after SRP repair
Hayder H. Alghazali, Zuhair K. Al-Jaberi, Zena R. Aljazaeri, John J. Myers
Volume 9, Issue 11, Pages 789-795, Year 2018
Publication Date (Web): Jul 25, 2018
DOI: 10.5185/amlett.2018.2153
Structure and properties degradation of the nuclear graphite under neutron irradiation
Boris A. Gurovich, Denis A. Kuleshov, Dmitriy A. Maltsev, Oleg K. Chugunov, Alexey S. Frolov, Yaroslav I. Shtrombakh
Volume 9, Issue 11, Pages 781-788, Year 2018
Publication Date (Web): Jul 24, 2018
DOI: 10.5185/amlett.2018.2132
Design of FES based muscle stimulator device using EMG and insole force resistive sensors for foot drop patients
Muhammad A. Khan, Saad Abdullah, Mauro Serpelloni, Emilio Sardini
Volume 9, Issue 11, Pages 776-780, Year 2018
Publication Date (Web): Jul 24, 2018
DOI: 10.5185/amlett.2018.2170
Joule heating of logs for phytosanitary purposes and timber processing pre-treatment
William J.B. Heffernan, Nurzhan Nursultanov, Ryan van Herel, Thomas Smart
Volume 9, Issue 11, Pages 767-775, Year 2018
Publication Date (Web): Jul 24, 2018
DOI: 10.5185/amlett.2018.2133
Magnetism of ACFs and superfluidity of 4He adsorbed in ACFs
Yoshiyuki Shibayama
Volume 9, Issue 11, Pages 760-766, Year 2018
Publication Date (Web): Jul 24, 2018
DOI: 10.5185/amlett.2018.2129
Behavior of EB FRP masonry bond under service temperature
Zuhair Al-Jaberi, John J. Myers, K. Chandrashekhara
Volume 9, Issue 11, Pages 753-759, Year 2018
Publication Date (Web): Jul 24, 2018
DOI: 10.5185/amlett.2018.2152
Multilayer ceramics as integration platform for sensors in in-vitro cell culture reactors
Heike Bartsch, Martin Baca, Uta Fernekorn, Marcel Himmerlich, Jens Müller, Andreas Schober, Hartmut Witte
Volume 9, Issue 11, Pages 748-752, Year 2018
Publication Date (Web): Jul 24, 2018
DOI: 10.5185/amlett.2018.2090
Archive
- Volume 10 (2019) - Advanced Materials Letters
- Volume 9 (2018) - Advanced Materials Letters
- Volume 9, Issue 12 pp 831-901, December 2018
- Volume 9, Issue 11 pp 748-830, November 2018
- Volume 9, Issue 10 pp 665-747, October 2018
- Volume 9, Issue 9 pp 610-664, September 2018
- Volume 9, Issue 8 pp 538-609, August 2018
- Volume 9, Issue 7 pp 462-537, July 2018
- Volume 9, Issue 6 pp 392-461, June 2018
- Volume 9, Issue 5 pp 311-391, May 2018
- Volume 9, Issue 4 pp 225-310, April 2018
- Volume 9, Issue 3 pp 153-224, March 2018
- Volume 9, Issue 2 pp 91-152, February 2018
- Volume 9, Issue 1 pp 1-90, January 2018
- Volume 8 (2017) - Advanced Materials Letters
- Volume 8, Issue 12 pp 1089-1210, December 2017
- Volume 8, Issue 11 pp 1004-1088, November 2017
- Volume 8, Issue 10 pp 944-1003, October 2017
- Volume 8, Issue 9 pp 944-1003, October 2017
- Volume 8, Issue 9 pp 883-943, September 2017
- Volume 8, Issue 8 pp 819-882, August 2017
- Volume 8, Issue 7 pp 752-818, July 2017
- Volume 8, Issue 6 pp 678-751, June 2017
- Volume 8, Issue 5 pp 577-677, May 2017
- Volume 8, Issue 4 pp 322-576, April 2017
- Volume 8, Issue 3 pp 185-321, March 2017
- Volume 8, Issue 2 pp 88-184, February 2017
- Volume 7, Issue 1 pp 1-85, January 2016
- Volume 7, Issue 2 pp 89-174, February 2016
- Volume 8, Issue 1 pp 01-87, January 2017
- Volume 7 (2016) - Advanced Materials Letters
- Volume 7, Issue 12 pp 945-1039, December 2016
- Volume 7, Issue 11 pp 851-944, November 2016
- Volume 7, Issue 10 pp 770-850, October 2016
- Volume 7, Issue 9 pp 683-769, September 2016
- Volume 7, Issue 8 pp 599-682, August 2016
- Volume 7, Issue 7 pp 501-598, July 2016
- Volume 7, Issue 6 pp 419-500, June 2016
- Volume 7, Issue 5 pp 337-418, May 2016
- Volume 7, Issue 4 pp 253-336, April 2016
- Volume 7, Issue 3 pp 175-252, March 2016
- Volume 7, Issue 2 pp 89-174, February 2016
- Volume 7, Issue 1 pp 01-88, January 2016
- Volume 6 (2015) - Advanced Materials Letters
- Volume 6, Issue 12 pp 1025-1115, December 2015
- Volume 6, Issue 11 pp 935-1024, November 2015
- Volume 6, Issue 10 pp 847-934, October 2015
- Volume 6, Issue 9 pp 756-846, September 2015
- Volume 6, Issue 8 pp 670-755, August 2015
- Volume 6, Issue 7 pp 566-669, July 2015
- Volume 6, Issue 6 pp 452-565, June 2015
- Volume 6, Issue 5 pp 370-451, May 2015
- Volume 6, Issue 4 pp 278-369, April 2015
- Volume 6, Issue 3 pp 186-277, March 2015
- Volume 6, Issue 2 pp 86-185, February 2015
- Volume 6, Issue 1 pp 1-85, January 2015
- Volume 5 (2014) - Advanced Materials Letters
- Volume 5, Issue 12 pp 682-741, December 2014
- Volume 5, Issue 11 pp 611-681, November 2014
- Volume 5, Issue 10 pp 549-610, October 2014
- Volume 5, Issue 9 pp 485-548, September 2014
- Volume 5, Issue 8 pp 421-484, August 2014
- Volume 5, Issue 7 pp 366-420, July 2014
- Volume 5, Issue 6 pp 297-365, June 2014
- Volume 5, Issue 5 pp 234-296, May 2014
- Volume 5, Issue 4 pp 161-233, April 2014
- Volume 5, Issue 3 pp 111-160, March 2014
- Volume 5, Issue 2 pp 59-110, February 2014
- Volume 5, Issue 1 pp 1-58, January 2014
- Volume 4 (2013) - Advanced Materials Letters
- Volume 4, Issue 12 pp 875-940, December 2013
- Volume 4, Issue 11 pp 797-874, November 2013
- Volume 4, Issue 10 pp 720-796, October 2013
- Volume 4, Issue 9 pp 655-719, September 2013
- Volume 4, Issue 8 pp 591-654, August 2013
- Volume 4, Issue 7 pp 507-590, July 2013
- Volume 4, Issue 6 pp 385-506, June 2013
- Volume 4, Issue 5 pp 327-384, May 2013
- Volume 4, Issue 4 pp 251-326, April 2013
- Volume 4, Issue 3 pp 174-250, March 2013
- Volume 4, Issue 2 pp 106-173, February 2013
- Volume 4, Issue 1 pp 1-105, January 2013
- Volume 3 (2012) - Advanced Materials Letters
- Volume 2 (2011) - Advanced Materials Letters
- Volume 1 (2010) - Advanced Materials Letters
Advanced Materials Letters
The official journal of the International Association of Advanced Materials (IAAM)
ISSN: 0976-3961
eISSN: 0976-397X
Articles Published
1208
Total Citations*
7586
*September, 2018 @Google Scholar
