Nanoindentation Shows Uniform Local Mechanical Properties Across Melt Pools And Layers Produced By Selective Laser Melting Of AlSi 10Mg Alloy

Notice (8): Trying to get property of non-object [APP/Controller/ArticlesController.php, line 300]

                $Issues_articles_image=$this->loadModel('Issues')->find('all')->where(['status'=>'1','admin_delete'=>'0','id'=>$article->volume])->order(['id' => 'DESC'])->first();
        
                $coverimage_artciles='/aml/uploads/coverimage/'.$Issues_articles_image->coverimage_file;

$id = '766'
$issue = object(Cake\ORM\Table) {

	'registryAlias' => 'Issues',
	'table' => 'issues',
	'alias' => 'Issues',
	'entityClass' => '\Cake\ORM\Entity',
	'associations' => [],
	'behaviors' => [],
	'defaultConnection' => 'default',
	'connectionName' => 'default'

}
$article_current = object(Cake\ORM\Table) {

	'registryAlias' => 'Articles',
	'table' => 'articles',
	'alias' => 'Articles',
	'entityClass' => '\Cake\ORM\Entity',
	'associations' => [],
	'behaviors' => [],
	'defaultConnection' => 'default',
	'connectionName' => 'default'

}
$article = object(Cake\ORM\Entity) {

	'id' => (int) 766,
	'user_id' => (int) 0,
	'volume' => (int) 72,
	'volumeno' => (int) 7,
	'issuseno' => (int) 1,
	'issusemonth' => 'January',
	'issuseyear' => '2016',
	'title' => '<p>Nanoindentation Shows Uniform Local Mechanical Properties Across Melt Pools And Layers Produced By Selective Laser Melting Of AlSi 10Mg Alloy</p>
',
	'meta_title' => 'Nanoindentation Shows Uniform Local Mechanical Properties Across Melt Pools And Layers Produced By Selective Laser Melting Of AlSi 10Mg Alloy',
	'meta_desc' => 'Nanoindentation Shows Uniform Local Mechanical Properties Across Melt Pools And Layers Produced By Selective Laser Melting Of AlSi 10Mg Alloy',
	'meta_keyword' => 'Nanoindentation; additive manufacturing; aluminium alloy.',
	'alias_name' => 'nanoindentationshowsuniformlocalmechanicalpropertiesacrossmeltpoolsandlayersproducedbyselectivelasermeltingofalsi10mgalloy',
	'authorname' => '<p>Nicola M. Everitt<sup>*</sup>, Nesma T. Aboulkhair, Ian Maskery, Chris J. Tuck, Ian Ashcroft</p>
',
	'authorfrontname' => 'Nicola M. Everitt, Nesma T. Aboulkhair, Ian Maskery, Chris J. Tuck, Ian Ashcroft ',
	'authoraffiliation' => '<p><em>Department of Mechanical, Materials and Manufacturing Engineering, University of Nottingham, University Park, Nottingham NG2 7RD, United Kingdom&nbsp;</em></p>
',
	'authoremail' => '<p>E-mail: nicola.everitt@nottingham.ac.uk</p>
',
	'authorbiography' => '',
	'page' => '13-16',
	'pagesequence' => '3',
	'doi' => '10.5185/amlett.2016.6171',
	'articletype' => '1',
	'keyword' => '<p>Nanoindentation, additive manufacturing, aluminium alloy.&nbsp;</p>
',
	'abstractpdf' => null,
	'abstractdec' => '<p style="text-align:justify"><span style="font-family:times new roman,serif">Single track and single layer AlSi 10Mg has been produced by selective laser melting (SLM) of alloy powder on an AlSi12 cast substrate. The SLM technique produced a cellular-dendritic ultra-fined grained microstructure. Chemical composition mapping and nanoindentation showed higher hardness in the SLM material compared to its cast counterpart.&nbsp; Importantly, although there was some increase of grain size at the edge of melt pools, nanoindentation showed that the hardness (i.e. yield strength) of the material was uniform across overlapping tracks. This is attributed to the very fine grain size and homogeneous distribution of Si throughout the SLM material.&nbsp;</span></p>
',
	'fullabstractpdf' => '56797545caffd1450800453_fullabstratct.pdf',
	'fullabstractdesc' => '',
	'supporting_information' => null,
	'tocimage' => '',
	'received' => '',
	'accepted_for_publication' => '',
	'checked_for_plagiarism' => 'Yes',
	'review_by' => '',
	'peer_reviewers_approved_by' => '',
	'peer_reviewer_comments' => '',
	'editor_who_approved_publication' => '',
	'created' => object(Cake\I18n\FrozenTime) {},
	'modified' => '2015-12-22 09:07:33',
	'sequence' => (int) 3,
	'status' => (int) 1,
	'published' => (int) 1,
	'mostcitedissue' => (int) 0,
	'view_counts' => (int) 0,
	'count_download' => (int) 0,
	'admin_delete' => (int) 0,
	'citation_author' => null,
	'citation_author_institution' => null,
	'last_page' => (int) 0,
	'article_html_data' => null,
	'refernece' => null,
	'[new]' => false,
	'[accessible]' => [
		'*' => true
	],
	'[dirty]' => [],
	'[original]' => [],
	'[virtual]' => [],
	'[errors]' => [],
	'[invalid]' => [],
	'[repository]' => 'Articles'

}
$issue_article = 'Volume 7, Issue 1, Article ID  13-16, January 2016'
$Issues_articles_image = null
$coverimage_artciles = ''
$coverimage_desc = ''
$issue_data = object(Cake\ORM\Entity) {

	'id' => (int) 523,
	'type' => '20',
	'volumenumber' => '11',
	'issusenumber' => '11',
	'issusemonth' => 'November',
	'issuseyear' => '2020',
	'pageno' => '20111570-20111578',
	'sequence' => (int) 1,
	'coverimage_file' => 'November_1603102315.jpg',
	'coverimagepdf_file' => null,
	'coverimage_desc' => '<p style="text-align: justify;">Public health authorities envision a world without pandemics and standard healthcare practices for diagnosis and control. Worldwide there are currently more than ~40 million persons affected due to the pandemic. As more countries report infection and lock-down, public health authorities are coming up with unique solutions. Currently, the World Health Organisation and Government authorities are engaged in spending up to billions of dollars to improve disease surveillance, sanitation practices, and control. Although improvement is slow as implementation will require more dedicated efforts until the vaccine arrives. The cover photo of the November 2020 issue of Advanced Materials Letters is inspired by the perspective article by Kar &amp; Gupta on &ldquo;<a href="https://www.vbripress.com/aml/articles/details/1565">Water And Sanitation Management: During And After COVID-19 Pandemic</a>&rdquo;</p>
',
	'download_count' => (int) 0,
	'admin_delete' => (int) 0,
	'status' => (int) 1,
	'created' => null,
	'modified' => object(Cake\I18n\FrozenTime) {},
	'[new]' => false,
	'[accessible]' => [
		'*' => true
	],
	'[dirty]' => [],
	'[original]' => [],
	'[virtual]' => [],
	'[errors]' => [],
	'[invalid]' => [],
	'[repository]' => 'Issues'

}

App\Controller\ArticlesController::details() - APP/Controller/ArticlesController.php, line 300
Cake\Controller\Controller::invokeAction() - CORE/src/Controller/Controller.php, line 429
Cake\Routing\Dispatcher::_invoke() - CORE/src/Routing/Dispatcher.php, line 114
Cake\Routing\Dispatcher::dispatch() - CORE/src/Routing/Dispatcher.php, line 87
[main] - ROOT/webroot/index.php, line 51

Notice (8): Trying to get property of non-object [APP/Controller/ArticlesController.php, line 302]

Code Context

                $coverimage_artciles='/aml/uploads/coverimage/'.$Issues_articles_image->coverimage_file;
        
                $coverimage_desc=$Issues_articles_image->coverimage_desc;

$id = '766'
$issue = object(Cake\ORM\Table) {

	'registryAlias' => 'Issues',
	'table' => 'issues',
	'alias' => 'Issues',
	'entityClass' => '\Cake\ORM\Entity',
	'associations' => [],
	'behaviors' => [],
	'defaultConnection' => 'default',
	'connectionName' => 'default'

}
$article_current = object(Cake\ORM\Table) {

	'registryAlias' => 'Articles',
	'table' => 'articles',
	'alias' => 'Articles',
	'entityClass' => '\Cake\ORM\Entity',
	'associations' => [],
	'behaviors' => [],
	'defaultConnection' => 'default',
	'connectionName' => 'default'

}
$article = object(Cake\ORM\Entity) {

	'id' => (int) 766,
	'user_id' => (int) 0,
	'volume' => (int) 72,
	'volumeno' => (int) 7,
	'issuseno' => (int) 1,
	'issusemonth' => 'January',
	'issuseyear' => '2016',
	'title' => '<p>Nanoindentation Shows Uniform Local Mechanical Properties Across Melt Pools And Layers Produced By Selective Laser Melting Of AlSi 10Mg Alloy</p>
',
	'meta_title' => 'Nanoindentation Shows Uniform Local Mechanical Properties Across Melt Pools And Layers Produced By Selective Laser Melting Of AlSi 10Mg Alloy',
	'meta_desc' => 'Nanoindentation Shows Uniform Local Mechanical Properties Across Melt Pools And Layers Produced By Selective Laser Melting Of AlSi 10Mg Alloy',
	'meta_keyword' => 'Nanoindentation; additive manufacturing; aluminium alloy.',
	'alias_name' => 'nanoindentationshowsuniformlocalmechanicalpropertiesacrossmeltpoolsandlayersproducedbyselectivelasermeltingofalsi10mgalloy',
	'authorname' => '<p>Nicola M. Everitt<sup>*</sup>, Nesma T. Aboulkhair, Ian Maskery, Chris J. Tuck, Ian Ashcroft</p>
',
	'authorfrontname' => 'Nicola M. Everitt, Nesma T. Aboulkhair, Ian Maskery, Chris J. Tuck, Ian Ashcroft ',
	'authoraffiliation' => '<p><em>Department of Mechanical, Materials and Manufacturing Engineering, University of Nottingham, University Park, Nottingham NG2 7RD, United Kingdom&nbsp;</em></p>
',
	'authoremail' => '<p>E-mail: nicola.everitt@nottingham.ac.uk</p>
',
	'authorbiography' => '',
	'page' => '13-16',
	'pagesequence' => '3',
	'doi' => '10.5185/amlett.2016.6171',
	'articletype' => '1',
	'keyword' => '<p>Nanoindentation, additive manufacturing, aluminium alloy.&nbsp;</p>
',
	'abstractpdf' => null,
	'abstractdec' => '<p style="text-align:justify"><span style="font-family:times new roman,serif">Single track and single layer AlSi 10Mg has been produced by selective laser melting (SLM) of alloy powder on an AlSi12 cast substrate. The SLM technique produced a cellular-dendritic ultra-fined grained microstructure. Chemical composition mapping and nanoindentation showed higher hardness in the SLM material compared to its cast counterpart.&nbsp; Importantly, although there was some increase of grain size at the edge of melt pools, nanoindentation showed that the hardness (i.e. yield strength) of the material was uniform across overlapping tracks. This is attributed to the very fine grain size and homogeneous distribution of Si throughout the SLM material.&nbsp;</span></p>
',
	'fullabstractpdf' => '56797545caffd1450800453_fullabstratct.pdf',
	'fullabstractdesc' => '',
	'supporting_information' => null,
	'tocimage' => '',
	'received' => '',
	'accepted_for_publication' => '',
	'checked_for_plagiarism' => 'Yes',
	'review_by' => '',
	'peer_reviewers_approved_by' => '',
	'peer_reviewer_comments' => '',
	'editor_who_approved_publication' => '',
	'created' => object(Cake\I18n\FrozenTime) {},
	'modified' => '2015-12-22 09:07:33',
	'sequence' => (int) 3,
	'status' => (int) 1,
	'published' => (int) 1,
	'mostcitedissue' => (int) 0,
	'view_counts' => (int) 0,
	'count_download' => (int) 0,
	'admin_delete' => (int) 0,
	'citation_author' => null,
	'citation_author_institution' => null,
	'last_page' => (int) 0,
	'article_html_data' => null,
	'refernece' => null,
	'[new]' => false,
	'[accessible]' => [
		'*' => true
	],
	'[dirty]' => [],
	'[original]' => [],
	'[virtual]' => [],
	'[errors]' => [],
	'[invalid]' => [],
	'[repository]' => 'Articles'

}
$issue_article = 'Volume 7, Issue 1, Article ID  13-16, January 2016'
$Issues_articles_image = null
$coverimage_artciles = '/aml/uploads/coverimage/'
$coverimage_desc = ''
$issue_data = object(Cake\ORM\Entity) {

	'id' => (int) 523,
	'type' => '20',
	'volumenumber' => '11',
	'issusenumber' => '11',
	'issusemonth' => 'November',
	'issuseyear' => '2020',
	'pageno' => '20111570-20111578',
	'sequence' => (int) 1,
	'coverimage_file' => 'November_1603102315.jpg',
	'coverimagepdf_file' => null,
	'coverimage_desc' => '<p style="text-align: justify;">Public health authorities envision a world without pandemics and standard healthcare practices for diagnosis and control. Worldwide there are currently more than ~40 million persons affected due to the pandemic. As more countries report infection and lock-down, public health authorities are coming up with unique solutions. Currently, the World Health Organisation and Government authorities are engaged in spending up to billions of dollars to improve disease surveillance, sanitation practices, and control. Although improvement is slow as implementation will require more dedicated efforts until the vaccine arrives. The cover photo of the November 2020 issue of Advanced Materials Letters is inspired by the perspective article by Kar &amp; Gupta on &ldquo;<a href="https://www.vbripress.com/aml/articles/details/1565">Water And Sanitation Management: During And After COVID-19 Pandemic</a>&rdquo;</p>
',
	'download_count' => (int) 0,
	'admin_delete' => (int) 0,
	'status' => (int) 1,
	'created' => null,
	'modified' => object(Cake\I18n\FrozenTime) {},
	'[new]' => false,
	'[accessible]' => [
		'*' => true
	],
	'[dirty]' => [],
	'[original]' => [],
	'[virtual]' => [],
	'[errors]' => [],
	'[invalid]' => [],
	'[repository]' => 'Issues'

}

App\Controller\ArticlesController::details() - APP/Controller/ArticlesController.php, line 302
Cake\Controller\Controller::invokeAction() - CORE/src/Controller/Controller.php, line 429
Cake\Routing\Dispatcher::_invoke() - CORE/src/Routing/Dispatcher.php, line 114
Cake\Routing\Dispatcher::dispatch() - CORE/src/Routing/Dispatcher.php, line 87
[main] - ROOT/webroot/index.php, line 51

Nanoindentation Shows Uniform Local Mechanical Properties Across Melt Pools And Layers Produced By Selective Laser Melting Of AlSi 10Mg Alloy

Nicola M. Everitt^*, Nesma T. Aboulkhair, Ian Maskery, Chris J. Tuck, Ian Ashcroft

Department of Mechanical, Materials and Manufacturing Engineering, University of Nottingham, University Park, Nottingham NG2 7RD, United Kingdom

Adv. Mater. Lett., 2016, 7 (1), pp 13-16

DOI: 10.5185/amlett.2016.6171

Publication Date (Web): Dec 22, 2015

E-mail: nicola.everitt@nottingham.ac.uk

Full Article

Abstract

Single track and single layer AlSi 10Mg has been produced by selective laser melting (SLM) of alloy powder on an AlSi12 cast substrate. The SLM technique produced a cellular-dendritic ultra-fined grained microstructure. Chemical composition mapping and nanoindentation showed higher hardness in the SLM material compared to its cast counterpart. Importantly, although there was some increase of grain size at the edge of melt pools, nanoindentation showed that the hardness (i.e. yield strength) of the material was uniform across overlapping tracks. This is attributed to the very fine grain size and homogeneous distribution of Si throughout the SLM material.

Keywords

Nanoindentation, additive manufacturing, aluminium alloy.

Full Article

<< Previous article in issue

Next article in issue >>

⊕ Current Issue

Water and Sanitation Management: During and after COVID-19 Pandemic

⊕View details

Full Article

Polymeric Energy Materials: Development and Challenges

⊕View details

Full Article

Influence of Different Copolymer Based Compatibilizers on Performance of Pristine and Recycled PP/PE blends

⊕View details

Full Article

Bio Ceramics: New Material from Mangrove Bark

⊕View details

Full Article

Hybrid Physical Chemical Vapour Deposition (HPCVD) of Superconducting MgB₂Thin Films on three Dimensional Copper Substrates

⊕View details

Full Article

Photoinduced Electron Transfer Reactions of tris(4,4’-dimethoxy-2,2’-bipyridyl)ruthenium(II)cation with Quinones in Aqueous Medium

⊕View details

Full Article

A Comparative Study of Green Synthesized AgNPs using Carissa Carandas and Nerium indicum Leaves and its Activities against Selected Human Pathogens and MCF 7 Cell

⊕View details

Full Article

Design and Modelling of Carbon Fiber Grid Structure based Carbon/Epoxy Composites for Enhanced Microwave Absorbing Properties

⊕View details

Full Article

Elaboration and Characterization of Macroporous Bioceramics using Polymeric Sponge Replication Method

⊕View details

Full Article

⊕ Previous issues

Advanced Healthcare Biomaterials

⊕View details

Full Article

Piezoelectric Alternative Energy Sources as a Part of the Global Energy Concerns – Future Prospects in the Science and Market

⊕View details

Full Article

Rectify the Injury-Induced Microenvironment Imbalance in Peripheral Nerve Repair

⊕View details

Full Article

A Mini Review on Biodegradable Magnesium Alloy Vascular Stent

⊕View details

Full Article

Prospective Applications of Marine Oriented Materials in the Repair of Peripheral Nerve Injury

⊕View details

Full Article

Design and Implementation of Dynamic FPAA Based Interface Circuit for Thin Film Lead-Free Piezoelectric Sensors

⊕View details

Full Article

An Аpproach for Nanostructuring of Piezoelectric Materials by Template-assisted Growth in Porous Aluminum Oxide

⊕View details

Full Article

Study of Sputtered Barium Strontium Titanate Films for Energy Harvesting Applications

⊕View details

Full Article

The Effect of Bias on Properties of DLC Coatings for Artificial Joints

⊕View details

Full Article

Fabrication of Tens-micron-sized Functionalized Polystyrene Microspheres for Utilization in Chiral Drug Isolation

⊕View details

Full Article

Upcoming Congress

Knowledge Experience at Sea ^TM

⊕Recommended Articles

Reply to commentary on "Spectral characterizatiob of the building...

⊕View details

Purchase PDF

Reply to commentary on "Spectral characterizatiob of the building...

⊕View details

Purchase PDF

Reply to commentary on "Spectral characterizatiob of the building...

⊕View details

Purchase PDF

advanced search

Nanoindentation Shows Uniform Local Mechanical Properties Across Melt Pools And Layers Produced By Selective Laser Melting Of AlSi 10Mg Alloy

Department of Mechanical, Materials and Manufacturing Engineering, University of Nottingham, University Park, Nottingham NG2 7RD, United Kingdom

Abstract

Keywords

Upcoming Congress

Knowledge Experience at Sea TM

⊕Recommended Articles

We Social

Knowledge Experience at Sea ^TM