Thermal Treatment Effect On Piezoelectric And Pyroelectric Properties Of BaTiO3 Ceramics

Abdelhalim Elbasset1*, Salaheddine Sayouri2

1LSSC Department of Electrical Engineering, FST, Road Immouzer, Fes, Morocco

2LPTA, Physics Department, Faculty of Science DM, B.P.1796, Fes-Atlas Morocco

Adv. Mater. Lett., 2015, 6 (11), pp 999-1003

DOI: 10.5185/amlett.2015.5976

Publication Date (Web): Oct 26, 2015

E-mail: elbasset.abdelhalim@gmail.com

Abstract


Structural, piezoelectric and pyroelectric characteristics of sol gel processed BaTiO3 ceramics calcined at different temperatures (500, 600, 700, 800, 900 and 1000°C) and sintered at 1100°C for 8 hours were investigated. The effect of heat treatment (calcinations) on the piezoelectric coefficient (d33) and the voltage constant (g33) was shown to be similar to that on the mechanical quality factor (Qm). The values of d33, g33 and Qm increase with increasing temperature and reach their maximum at 1000°C (d33=79.16, g33=28.01 and Qm=199). The results revealed that the full width at half maximum (FWHM) of the bands B1and E(TO3+ LO2) has high value and is essential for obtaining BT ceramics having good properties.

Keywords

Structural characteristics, full width at half maximum (FWHM), piezoelectric parameters, pyroelectric.

Current Issue

Advanced Materials Congress Celebrating 10th Years of Establishment


Secure Management of Networked Batteries for Building Integrated Photovoltaics (BIPV) Systems  


The Cause of 100-year Low Carbonated Concrete of the Bridge 


Organic Montmorillonite Intercalated Nano-composites Prevent Post-Surgical Associated Infections


Morphology/tensile Performance Relationship for LLDPE/PP Double Gated Injected Blends


Preparation and Characterization of Nickel Ferrite Nanoparticles via Sol-gel Method


Nitrogen-doped Diamond Nanowire Gas Sensor for the Detection of Methane


Manufacture of Functional Open-cell Al Foams with Recycled Al Scraps using NaCl Ball Space Holder 


Vilsmeier-Haack Transformations under Non Classical Conditions


New Application of Highly Vesicular Basalt from Jabel Isbil Volcano (Dhamar-Rada'a Volcanic Field), Yemen


An Assessment of Tribological Characteristics under different Operating Condition


Functional Bi Coatings as A Perspective Material for Radiation Shields Production against Electron Radiation


Effects of Silica Modified NiFe2O4 on the Dielectric and Electrical Properties of NiFe2O4 filled Poly (methyl methacrylate) Composites


Previous issues
The Journey of a Decade to Advancing Materials Are the Electrospun Polymers Polymeric Fibers? Mechanical and Thermal Properties of Composite Material and Insulation for a Single Walled Tank for Cryogenic Liquids Prediction of Long-Term Behavior for Dynamically Loaded TPU Investigation of Doped Titanium Dioxide in Anatase Phase. Study ab initio using Density Functional Theory Comparison between Single Al2O3 or HfO2 Single Dielectric Layers and their Nanolaminated Systems Preparation of Stable and Optimized Antibody-gold Nanoparticle Conjugates for Point of Care Test Immunoassays Resonance-Based Temperature Sensors using a Wafer Level Vacuum Packaged SOI MEMS Process Integrated System Based on the Hall Sensors Incorporating Compensation of the Distortions The Efficacy of Cinnamomum Tamala as a Potential Antimicrobial Substance against the Multi-Drug Resistant Enterococcus Faecalis from Clinical Isolates The Effect of Complexing Reagent on Structural, Electrical and Optical Properties of CuS Thin Film Laser Cladding of Fluorapatite Nanopowders on Ti6Al4V Preparation and Evaluation of Sulfonate Polyethylene Glycol Borate Ester as a Modifier of Functional Properties of Complex Petroleum Lithium Grease

Upcoming Congress

Knowledge Experience at Sea TM