Correlation between oxygen partial pressure and properties of pulsed laser deposited SnO2/Fe2O3 comp Correlation between oxygen partial pressure and properties of pulsed laser deposited SnO2/Fe2O3 comp
1Department of Applied Physics, Indian School of Mines, Dhanbad 826004, India
2UGC-DAE Consortiums for Scientific Research, Khandwa Road, Indore 452017, India
Adv. Mater. Lett., 2015, 6 (10), pp 930-934
Publication Date (Web): Sep 18, 2015
Copyright © IAAM-VBRI Press
SnO2/Fe2O3 composite thin films were deposited on quartz substrates at various oxygen partial pressures with a substrate temperature of 750 °C by pulsed laser deposition. The structural and optical properties of the deposited films were studied by X-ray diffraction (XRD), Atomic force microscopy (AFM), UV–visible spectroscopy and Photoluminescence. X-ray diffraction analysis revealed the formation of mixed phases (tetragonal SnO2 and hexagonal α-Fe2O3) at lower oxygen partial pressure (0.1 mTorr) and only tetragonal phase at higher oxygen partial pressures (50-250 mTorr). Atomic force microscopy studies show the dense and uniform distribution of composite films. The average RMS roughness of the films increases with increasing oxygen partial pressure. The bandgap was found varying between 3.55 and 3.85 eV for different oxygen pressures. A strong broad blue emission band was observed for all the oxygen partial pressures. The origin of the blue emission in the composite film is discussed with the help of vacancy creation. A correlation between oxygen partial pressure and the properties of SnO2/Fe2O3 .
Thin film, X-ray diffraction, photoluminescence.