Department of Mechanical Engineering, Ambala College of Engineering and Applied Research, Devsthali, Ambala, India
Adv. Mater. Lett., 2013, Current Issue, 4 (7), pp 567-572
DOI: 10.5185/amlett.2012.11475
Publication Date (Web): May 01, 2013
Copyright © IAAM-VBRI Press
E-mail: satnam.mmu@gmail.com
Composites are one of the most advanced and adaptable engineering materials. The strength of any composite depends upon volume/weight fraction of reinforcement, L/D ratio of fibers, orientation angles and other factors. The present work focuses on determination of mechanical properties of pure epoxy and random oriented glass fiber (mat) reinforced epoxy at 10% and 20% weight fractions of glass fibers. The test specimens were prepared and tested according to ASTM standards. The experimental results revealed that with increase in weight fraction of reinforcement, the tensile strength and flexural strength increased by 14.5 % and 123.65% for 20 % glass reinforced composites over pure epoxy. The numerical results obtained were in good agreement to the experimental results. However increased reinforcement increases the brittleness of material which may results in low impact strength. This study further can be used to optimize the weight fraction of glass fibers, to achieve a combination of strength without compromising the impact strength of composites.
Fiber reinforced plastic, polymer composites, tensile strength, flexural strength, finite element analysis, weightfraction.
Perspectives on Published Energy Sources and Smart Energy Supplies
State of Art Review on Nanobubbles
Eggshell Membrane Assisted CdS Nanoparticles for Manganese Removal in Water Treatment
Green Chemistry Synthesis of Nano-Hydroxyapatite using Natural Stabilisers
Structural, Optical and Electrical Properties of CaSnO3 and Ca0.98Nd0.02Sn0.98Ti0.02O3 Synthesized using Sol-Gel Method
Phase Change Materials Reinforced with Aluminium Foam for Latent Heat Storage
Influence of Manganese and Copper Doping on Structural and Optical Properties of Chromium Oxide Nanoparticles
Understanding of intriguing metal to semiconductor transition in Ni0.5Zn0.5Fe2O4 nanoparticulates
Flaw Resistance and Mode - I Fracture Energy Redistribution in Bamboo - A Correlation
COVID-19: A Significant Revival Approach - Concurrent Case Study in India
Recent Advances in Biochar Modification for Energy Storage in Supercapacitors: A Review
Viral Evolution of Multiple Coronavirus Genomes on Genomic Index Maps
Solution Combustion Synthesis and Energy Transfer in LaMgAl11O19:Tb3+/Sm3+ Tunable Phosphor
Influence of Fe3O4 and CTABr on the Rate of Degradation of Methylene Blue by H2O2
Effect of Sulfurization Temperature on RF Sputtered MoS2 Thin Film
Fatigue Analysis for Fe-34.5Mn-l0Al-0.76C Tidal Turbine Blades using Rainflow Algorithm
Modelling for the Study of Thermoelastic Properties of Nanoparticles
Potato Starch Edible Films as Environmentally Friendly Carriers for Model Drug: In vitro Release Study