1Ames Laboratory, US Department of Energy, Ames, IA 50011, USA
2Department of Materials Science and Engineering, Iowa State University, Ames, IA 50011, USA
Adv. Mater. Lett., 2012, Current Issue, 3 (5), pp 362-364
DOI: 10.5185/amlett.2012.6360
Publication Date (Web): Sep 16, 2012
Copyright © IAAM-VBRI Press
E-mail: russell@iastate.edu
The yield strength, ultimate tensile strength, elastic modulus, and strain rate sensitivity of pure Sr metal in the as-extruded condition were determined by tensile testing and compared with the properties of other alkaline metals. Two strain rates were used for testing. At a strain rate of 6.5×10-4 s-1, Sr has a 0.2% offset yield strength of 71.6 MPa, an ultimate tensile strength of 88.1 MPa, and 10.4% elongation at fracture. At a strain rate of 6.3×10-3 s-1, Sr has a 0.2% offset yield strength of 81.9 MPa, and ultimate tensile strength of 101.5 MPa, and 5.0% elongation at fracture. The strain rate sensitivity was determined to be 0.059.
Strontium metal, tensile strength, tensile elongation, strain rate sensitivity
Water and Sanitation Management: During and after COVID-19 Pandemic
Polymeric Energy Materials: Development and Challenges
Influence of Different Copolymer Based Compatibilizers on Performance of Pristine and Recycled PP/PE blends
Bio Ceramics: New Material from Mangrove Bark
Hybrid Physical Chemical Vapour Deposition (HPCVD) of Superconducting MgB2 Thin Films on three Dimensional Copper Substrates
Photoinduced Electron Transfer Reactions of tris(4,4’-dimethoxy-2,2’-bipyridyl)ruthenium(II)cation with Quinones in Aqueous Medium
A Comparative Study of Green Synthesized AgNPs using Carissa Carandas and Nerium indicum Leaves and its Activities against Selected Human Pathogens and MCF 7 Cell
Design and Modelling of Carbon Fiber Grid Structure based Carbon/Epoxy Composites for Enhanced Microwave Absorbing Properties
Elaboration and Characterization of Macroporous Bioceramics using Polymeric Sponge Replication Method
Advanced Healthcare Biomaterials
Piezoelectric Alternative Energy Sources as a Part of the Global Energy Concerns – Future Prospects in the Science and Market
Rectify the Injury-Induced Microenvironment Imbalance in Peripheral Nerve Repair
A Mini Review on Biodegradable Magnesium Alloy Vascular Stent
Prospective Applications of Marine Oriented Materials in the Repair of Peripheral Nerve Injury
Design and Implementation of Dynamic FPAA Based Interface Circuit for Thin Film Lead-Free Piezoelectric Sensors
An Аpproach for Nanostructuring of Piezoelectric Materials by Template-assisted Growth in Porous Aluminum Oxide
Study of Sputtered Barium Strontium Titanate Films for Energy Harvesting Applications
The Effect of Bias on Properties of DLC Coatings for Artificial Joints
Fabrication of Tens-micron-sized Functionalized Polystyrene Microspheres for Utilization in Chiral Drug Isolation
Copyright ©2010-2020 VBRI Press
Full Article