Department of Mechanical Engineering, Indian Institute of Technology (ISM), Dhanbad, 826004, India
Adv. Mater. Lett., 2018, 9 (9), pp 652-655
DOI: 10.5185/amlett.2018.2078
Publication Date (Web): Jun 14, 2018
Copyright © IAAM-VBRI Press
E-mail: nksingh221@gmail.com
Aluminium matrix composite was prepared by using an innovative approach of using graphene indent on copper particles as inforcement material. The reinforcement was mixed and ball milled for 30 and 60 min respectively to get proper sight of copper fracture where graphene (GNP) can be embedded. The reinforcement was also milled for 30 minutes to get uniform distribution of reinforcement in powder state. Casting technique was used with argon gas environment and mechanical stirrer to get final composite material. The morphological analysis has shown proper indent of graphene with Al-Cu and Cu-GNP interface. The composite so formed has micro hardness of 87 HV with an increment of 36.78% whereas yield strength and ultimate tensile strength have increased by 36.67% and 37.162% respectively.
Current Scenario of Coronavirus Pandemic
Study on a New Type of Walking Training System with Human Compatibility
Vitalized Water
Piezoelectric d15 Shear-Mode Sensor in Parallel and Series Configurations
A Lowering Friction Treatment for Railway Materials
Biomachines for Medical Diagnosis
Do the Ni binding modes on C12N12 cluster influence its H2 trapping capability?
Investigation of Mechanical, Thermal and Melt Flow Performance of Polycarbonate Hybrid Composites Containing Mica Flakes and Glass Fiber
Effect of Incident Light on Transport Properties of Pulsed Laser Deposited Manganite Thin Films
Celebrating 10th Years of Diamond Open Access Publishing in Advanced Materials
Cerebral Oxygenation Studies Through Near Infrared Spectroscopy: A Review
Analysis of Fine Sulfoaluminate Cement by Strength and Thermogravimetric Analysis
Characterization of the Interfacial Surface Energy for Composite Electrical Conduction Measurements using Two Full Range Percolation Threshold Models
Quantitative Detect of Fatigue of Membrane of Erythrocyte in Uniform Shear Field
Ecofriendly-developed Polyacrylic Acid-coated Magnetic Nanoparticles as Catalysts in Photo-fenton Processes
Evaluation of Drug Interactions with Medications Prescribed to Ambulatory Patients with Metabolic Syndrome in Urban Area
Fiber-reinforced Cementitious Composite: Sensitivity Analysis and Parameter Identification
Evaluation of Drug Utilization Patterns Based on World Health Organization Drug use Indicators at Outpatients Clinics
Are Quantitatively Micro-machined Scaffolds Effective for Cell Technology?
Synthesis and Characterization of Gold Nanoparticles from Lobelia Nicotianifolia Leaf Extract and its Biological Activities
Advanced Oxidations of Tartrazine Azo-dye
Antifungal Activity of Salvia jordanii Against the Oral Thrush Caused by the Cosmopolitan Yeast Candida albicans among Elderly Diabetic Type 2 patients
Copyright ©2010-2020 VBRI Press
Full Article