Fibril orientation and strength in collagen materials and adaptation to strain

Hannah C. Wells1, Hanan R. Kayed1, Katie H. Sizeland1, 2, Susyn J.R Kelly1, Melissa M. Basil-Jones1, Richard L. Edmonds3, Richard G. Haverkamp1*

1School of Engineeing and Advanced Technology, Massey University, Riddet Road, Palmerston North 4410, New Zealand

2 SAXS/WAXS, Australian Synchrotron,  800 Blackburn Road, Clayton, VIC 3168, Australia

3Leather and Shoe Research Association, Dairy Farm Road, Palmerston North 4414, New Zealand

Adv. Mater. Lett., 2018, 9 (6), pp 411-418

DOI: 10.5185/amlett.2018.1844

Publication Date (Web): May 17, 2018

E-mail: r.haverkamp@massey.ac.nz

Abstract


Collagen based soft materials are important as medical materials and as consumer products. Strength is a crucial parameter. A better understanding of the structural factors that contribute to strength is sought. Synchrotron based small angle X-ray scattering was used to characterize the collagen fibril structure and structural arrangement in a range of collagen based materials including leather, surgical scaffold materials and glutaraldehyde stabilized pericardium. Structure was compared with strength and was also characterized during strain. When collagen fibrils are orientated in a highly layered structure (with a high orientation index) the materials exhibit higher tear strength. This applies to leather, surgical scaffolds derived from dermis and pericardium. A more layered structure is found in stronger leather, and depends on the species of the source animal and processing conditions. For surgical scaffolds and stabilized pericardium stronger material is found also to have a more layered structure. In pericardium it is affected by the age of the source animal with younger animals having a more layered fibril arrangement in the pericardium. When collagen based soft materials are strained, the material responds first by a reorientation of the fibrils then by extension of individual fibrils, and this enables them to withstand high stresses. 

Keywords

Collagen, leather, orientation, SAXS, structure.

Current Issue

Advanced Materials Congress Celebrating 10th Years of Establishment


Secure Management of Networked Batteries for Building Integrated Photovoltaics (BIPV) Systems  


The Cause of 100-year Low Carbonated Concrete of the Bridge 


Organic Montmorillonite Intercalated Nano-composites Prevent Post-Surgical Associated Infections


Morphology/tensile Performance Relationship for LLDPE/PP Double Gated Injected Blends


Preparation and Characterization of Nickel Ferrite Nanoparticles via Sol-gel Method


Nitrogen-doped Diamond Nanowire Gas Sensor for the Detection of Methane


Manufacture of Functional Open-cell Al Foams with Recycled Al Scraps using NaCl Ball Space Holder 


Vilsmeier-Haack Transformations under Non Classical Conditions


New Application of Highly Vesicular Basalt from Jabel Isbil Volcano (Dhamar-Rada'a Volcanic Field), Yemen


An Assessment of Tribological Characteristics under different Operating Condition


Functional Bi Coatings as A Perspective Material for Radiation Shields Production against Electron Radiation


Effects of Silica Modified NiFe2O4 on the Dielectric and Electrical Properties of NiFe2O4 filled Poly (methyl methacrylate) Composites


Previous issues
The Journey of a Decade to Advancing Materials Are the Electrospun Polymers Polymeric Fibers? Mechanical and Thermal Properties of Composite Material and Insulation for a Single Walled Tank for Cryogenic Liquids Prediction of Long-Term Behavior for Dynamically Loaded TPU Investigation of Doped Titanium Dioxide in Anatase Phase. Study ab initio using Density Functional Theory Comparison between Single Al2O3 or HfO2 Single Dielectric Layers and their Nanolaminated Systems Preparation of Stable and Optimized Antibody-gold Nanoparticle Conjugates for Point of Care Test Immunoassays Resonance-Based Temperature Sensors using a Wafer Level Vacuum Packaged SOI MEMS Process Integrated System Based on the Hall Sensors Incorporating Compensation of the Distortions The Efficacy of Cinnamomum Tamala as a Potential Antimicrobial Substance against the Multi-Drug Resistant Enterococcus Faecalis from Clinical Isolates The Effect of Complexing Reagent on Structural, Electrical and Optical Properties of CuS Thin Film Laser Cladding of Fluorapatite Nanopowders on Ti6Al4V Preparation and Evaluation of Sulfonate Polyethylene Glycol Borate Ester as a Modifier of Functional Properties of Complex Petroleum Lithium Grease

Upcoming Congress

Knowledge Experience at Sea TM