Study of the properties of La-doped ZnS thin Films synthesized by Sol-gel method
Amel Tounsi1, Djahida Talantikite-Touati1, 3*, Hamid Merzouk2, 3, Hadjira Haddad1, Roumaïssa Khalfi1
1Department of Chemistry, Abderrahmane Mira University, 06000 Bejaia, Algeria
2Department of Physic, Abderrahmane Mira University, 06000 Bejaia, Algeria
3LGE Laboratory, Abderrahmane Mira University, 06000 Bejaia, Algeria
Adv. Mater. Lett., 2018, 9 (3), pp 216-219
DOI: 10.5185/amlett.2018.1963
Publication Date (Web): May 16, 2018
Copyright © 2019 VBRI Press
E-mail: dtalantikite@yahoo.fr
The thin layers of undoped ZnS and ZnS doped La with different concentrations (2, 4, 6, 8 and 10%) were deposited on glass substrates using sol-gel and dip-coating methods. The structural characterization of these samples was carried out by the X-rays diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). UV-visible and Fourier Transform Infrared spectroscopy (FTIR) have been used to study the effect of dopant on the optical properties of ZnS doped La thin films. Atomic force microscopy images of the films have revealed homogeneous and granular structure and the SEM micrographies show deposit films with uniform and porous structure. The optical transmission spectra in the UV - visible range have shown that all the doped films present a good optical transmission in the visible domain.
Cloud Medicine set to Revolutionize Doorstep Personalized Healthcare
Various surfactants for 0 – 3 dimensional nanocarbons: Separation, exfoliation and solubilization
Polypyrrole based biofunctional composite layer for bioelectrocatalytic device system
Innovative Graphene-PDMS sensors for aerospace applications
Effect of hot drawing process and carbonization temperature in electrochemical behavior of electrospun carbon nanofibers
Chemical Reactivity and Electronical Properties of Graphene and Reduced Graphene Oxide on Different Substrates
Laser Raman micro-spectroscopy as an effective non-destructive method of detection and identification of various sp2 carbon modifications in industry and in nature
Electrochemical promotion of ammonia synthesis with proton-conducting solid oxide fuel cells
Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity
Enhancement the properties of high and low-density polyethylene membranes by radiation grafting process
Synthesis of 9-Aminoacridine and its Application as an Anode Material for Aqueous Rechargeable Lithium–ion Batteries
Facile synthesis of novel tough and highly flexible biodegradable membranes for water microfiltration
Investigating the possibility of using acetic acid in place of HF in chromium-benzenedicarboxylates (MIL-53 and MIL-101) synthesis applicable for CO2 adsorption
Smart Healthcare pulls up Clouds for Virtual Medicine
Selecting the correct electromagnetic inspection technology
Influence of railway-track grinding on the track material condition and tribological behaviour
Micromechanical Fatigue Modelling of the Size Effect in Micro-Scale 316L Stainless Steel Specimens
Functionalization of Graphene and Reduced Graphene Oxide in Different Matrices
Effect of parasitic polytypes on ballistic electron transport in chemical vapor deposition grown 6H-SiC epitaxial layers
Photomemristive heterostructures based on two-dimensional crystals
Architecture - behaviour - properties relationship in Star-shaped MPA-PMMA and MPA-PS hyper-branched copolymers
Graphene and doped graphene: A comparative DFT study
Ag2CO3 / Magnetic reduced graphene oxide nanocomposite as advanced visible light photocatalytic hybrid materials for efficient degradation of azo dye
Optimization of acid hydrolysis process for the preparation cellulose nanofibrils
Alginate/k-carrageenan and alginate/gelatin composite hydrogel beads for controlled drug release of curcumin
Study of microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel
Copyright ©2010-2019 VBRI Press
Full Article