Cover Page March-2018-Advanced Materials Letters

Advanced Materials Letters

Volume 9, Issue 3, Pages 192-198, March 2018
About Cover


Effect of deposition temperature on the electrochromic properties of WO3 grown by LPCVD

D. Louloudakis1*, D. Vernardou1, 2, G. Papadimitropoulos3, D. Davazoglou3 and E. Koudoumas1, 2 

1Center of Materials Technology and Photonics, School of Engineering, Technological Educational Institute of Crete, 710 04 Heraklion, Crete, Greece

2Department of Electrical Engineering, School of Engineering, Technological Educational Institute of Crete, 710 04 Heraklion, Crete, Greece

3NCSR “Demokritos”, Institute of Nanoscience and Nanotechnology, P.O. Box 60228, 15310 Agia Paraskevi, Athens, Greece

Adv. Mater. Lett., 2018, 9 (3), pp 192-198

DOI: 10.5185/amlett.2018.1823

Publication Date (Web): May 16, 2018

E-mail: dimitr17@yahoo.gr

Abstract

Monoclinic electrochromic tungsten trioxide (WO3) layers were grown on FTO substrates using a Low-Pressure Chemical Vapor Deposition (LPCVD) system. The effect of the deposition temperature on the structural and morphological characteristics as well as the electrochromic response of the layers was examined. It was found that increasing deposition temperature improves the crystallinity of the layers which affects their electrochemical/electrochromic behavior. 

Keywords

LPCVD, tungsten trioxide, electrochromic response.

Previous issues

Cloud Medicine set to Revolutionize Doorstep Personalized Healthcare

Various surfactants for 0 – 3 dimensional nanocarbons: Separation, exfoliation and solubilization

Polypyrrole based biofunctional composite layer for bioelectrocatalytic device system

Innovative Graphene-PDMS sensors for aerospace applications 

Effect of hot drawing process and carbonization temperature in electrochemical behavior of electrospun carbon nanofibers

Chemical Reactivity and Electronical Properties of Graphene and Reduced Graphene Oxide on Different Substrates

Laser Raman micro-spectroscopy as an effective non-destructive method of detection and identification of various sp2 carbon modifications in industry and in nature

Electrochemical promotion of ammonia synthesis with proton-conducting solid oxide fuel cells

Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity

Enhancement the properties of high and low-density polyethylene membranes by radiation grafting process

Synthesis of 9-Aminoacridine and its Application as an Anode Material for Aqueous Rechargeable Lithium–ion Batteries

Facile synthesis of novel tough and highly flexible biodegradable membranes for water microfiltration

Investigating the possibility of using acetic acid in place of HF in chromium-benzenedicarboxylates (MIL-53 and MIL-101) synthesis applicable for CO2 adsorption

Upcoming Congress

Knowledge Experience at Sea TM