Cover Page February-2017-Advanced Materials Letters

Advanced Materials Letters

Volume 8, Issue 2, Pages 136-144, February 2017
About Cover

Rapid fabrication of high density C/C composite by coupling of processes

T. S. K. Raunija1,2*, R. K. Gautam2, S.C. Sharma3, A. Verma2*

1Carbon and Ceramics Laboratory (CCL), Materials and Mechanical Entity, Vikram Sarabhai Space Centre,  Indian Space Research Organisation, Thiruvananthapuram 695022, Kerala, India

2Sustainable Environergy Research Lab (SERL), Department of Chemical Engineering, Indian Institute of Technology Delhi, Hauz-Khas 110016, New Delhi, India

3Materials and Metallurgy Group (MMG), Materials and Mechanical Entity, Vikram Sarabhai Space Centre, Indian Space Research Organisation, Thiruvananthapuram 695022, Kerala, India

Adv. Mater. Lett., 2017, 8 (2), pp 136-144

DOI: 10.5185/amlett.2017.6673

Publication Date (Web): Dec 27, 2016



The main objective of the work was to rapidly prepare high density short carbon fiber reinforced randomly oriented C/C composite by coupling the processes. The C/C composite was fabricated by coupling two processes. In primary high pressure HP method, medium density C/C composite was prepared by mixing the exfoliated carbon fibers and PMP with distilled water; moulding of the slurry; drying of the green cake; hot-pressing of the preform and finally carbonizing the compact. In secondary low pressure ITC method, the medium density C/C composite was densified by SMP in three repeated cycles to obtain high density. The composite was characterized for microstructure, density, porosity, hardness, flexural strength, compressive strength and permeability. The results showed that the coupling of primary method with secondary method resulted in fine microstructure, high density (1.70 g/cm3), excellent mechanical properties (flexural strength 77 MPa and compressive strength 161 MPa) and reduced porosity & permeability.


Exfoliation, mixing, moulding, hot-pressing, carbonization, densification, coupling, C/C composite.

Current Issue

Cloud Medicine set to Revolutionize Doorstep Personalized Healthcare

Various surfactants for 0 – 3 dimensional nanocarbons: Separation, exfoliation and solubilization

Polypyrrole based biofunctional composite layer for bioelectrocatalytic device system

Innovative Graphene-PDMS sensors for aerospace applications 

Effect of hot drawing process and carbonization temperature in electrochemical behavior of electrospun carbon nanofibers

Chemical Reactivity and Electronical Properties of Graphene and Reduced Graphene Oxide on Different Substrates

Laser Raman micro-spectroscopy as an effective non-destructive method of detection and identification of various sp2 carbon modifications in industry and in nature

Electrochemical promotion of ammonia synthesis with proton-conducting solid oxide fuel cells

Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity

Enhancement the properties of high and low-density polyethylene membranes by radiation grafting process

Synthesis of 9-Aminoacridine and its Application as an Anode Material for Aqueous Rechargeable Lithium–ion Batteries

Facile synthesis of novel tough and highly flexible biodegradable membranes for water microfiltration

Investigating the possibility of using acetic acid in place of HF in chromium-benzenedicarboxylates (MIL-53 and MIL-101) synthesis applicable for CO2 adsorption

Previous issues

Smart Healthcare pulls up Clouds for Virtual Medicine

Selecting the correct electromagnetic inspection technology 

Influence of railway-track grinding on the track material condition and tribological behaviour

Micromechanical Fatigue Modelling of the Size Effect in Micro-Scale 316L Stainless Steel Specimens

Functionalization of Graphene and Reduced Graphene Oxide in Different Matrices

Effect of parasitic polytypes on ballistic electron transport in chemical vapor deposition grown 6H-SiC epitaxial layers

Photomemristive heterostructures based on two-dimensional crystals

Architecture - behaviour - properties relationship in Star-shaped MPA-PMMA and MPA-PS hyper-branched copolymers

Graphene and doped graphene: A comparative DFT study

Ag2CO3 / Magnetic reduced graphene oxide nanocomposite as advanced visible light photocatalytic hybrid materials for efficient degradation of azo dye

Optimization of acid hydrolysis process for the preparation cellulose nanofibrils

Alginate/k-carrageenan and alginate/gelatin composite hydrogel beads for controlled drug release of curcumin

Study of microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel

Upcoming Congress

Knowledge Experience at Sea TM