Polypyrrole-Pt nanocomposites as electrochemical glucose sensor

Polypyrrole-Pt Nanocomposites As Electrochemical Glucose Sensor

Nitin R. Dighore, Suresh T. Gaikwad, Anjali S. Rajbhoj*

Department of Chemistry, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad 431004, India

Adv. Mater. Lett., 2016, 7 (12), pp 1035-1039

DOI: 10.5185/amlett.2016.6561

Publication Date (Web): Oct 12, 2016



A voltammetric sensor was developed for detection of glucose by using cyclic voltammetry (CV). The sensing platform was Polypyrrole-Pt nanocomposites on Platinum electrode (PPy-Pt-PtE). PPy-Pt was synthesized by chemical method, using FeCl3 oxidant. XRD, SEM and TEM results showed that PPy doped with Pt were highly porous, nanocrystalline composites. The PPy-Pt-PtE modified electrode observed reversible behavior with ferricyanide system which had about 2.05 times more surface area and exhibited higher currents for glucose oxidation compared to bare PtE. Glucose was sensed in the range of 100mM to 1000 mM from the linear regression plotted R2= 0.990 and R2= 0.994 the sensitivity was found to be 0.047 mA/mM~cm2 and 0.0445 mA/mM~cm2. These results indicate that PPy-Pt-PtE exhibited good platform and could be used for voltammetric determination of glucose.


PPy-Pt nanocomposite, electrochemical analysis, glucose sensor, cyclic voltammetry.

Upcoming Congress

Knowledge Experience at Sea TM