1Research Institute of Medical Materials, Tomsk State University, Tomsk, Russia
2School of Materials Science and Engineering, University of Ulsan, Ulsan, South Korea
3Kang & Park Medical Co., O-Song Chungcheongbukdo, South Korea
Adv. Mater. Lett., 2016, 7 (8), pp 630-634
DOI: 10.5185/amlett.2016.6043
Publication Date (Web): Jul 01, 2016
Copyright © IAAM-VBRI Press
E-mail: tc77@mail2000.ru
Modern medical technologies have developed many new devices that can be implanted into humans to repair, assist or take the place of diseased or defective bones, arteries and even organs. The materials, especially porous ones, used for these devices have evolved steadily over the past twenty years with TiNi-based alloys replacing stainless steels and titanium. The aim of the paper is to presents results for examination of porous TiNiMoCo-based alloy intended further to be used in clinical practice. Porous TiNi-based alloys showing shape memory effect were obtained by the methods of reaction and diffusion sintering with cobalt additives. From the results of the analysis of temperature dependences determined by the measurement of electrical resistivity and shape memory effect test, the effect of cobalt addition on the martensitic transformations in sintered body is described. The addition of cobalt during reaction and, especially, diffusion sintering, results in a decrease in the internal stresses in the TiNi phase. The addition of Co more than 1 at. % led to precipitation hardening of the alloy. Cobalt at concentrations studied in the work led to suppression of martensitic phase transformation.
Porous TiNi-based alloy, diffusion sintering, reaction sintering, shape memory effect.
Perspectives on Published Energy Sources and Smart Energy Supplies
State of Art Review on Nanobubbles
Eggshell Membrane Assisted CdS Nanoparticles for Manganese Removal in Water Treatment
Green Chemistry Synthesis of Nano-Hydroxyapatite using Natural Stabilisers
Structural, Optical and Electrical Properties of CaSnO3 and Ca0.98Nd0.02Sn0.98Ti0.02O3 Synthesized using Sol-Gel Method
Phase Change Materials Reinforced with Aluminium Foam for Latent Heat Storage
Influence of Manganese and Copper Doping on Structural and Optical Properties of Chromium Oxide Nanoparticles
Understanding of intriguing metal to semiconductor transition in Ni0.5Zn0.5Fe2O4 nanoparticulates
Flaw Resistance and Mode - I Fracture Energy Redistribution in Bamboo - A Correlation
COVID-19: A Significant Revival Approach - Concurrent Case Study in India
Recent Advances in Biochar Modification for Energy Storage in Supercapacitors: A Review
Viral Evolution of Multiple Coronavirus Genomes on Genomic Index Maps
Solution Combustion Synthesis and Energy Transfer in LaMgAl11O19:Tb3+/Sm3+ Tunable Phosphor
Influence of Fe3O4 and CTABr on the Rate of Degradation of Methylene Blue by H2O2
Effect of Sulfurization Temperature on RF Sputtered MoS2 Thin Film
Fatigue Analysis for Fe-34.5Mn-l0Al-0.76C Tidal Turbine Blades using Rainflow Algorithm
Modelling for the Study of Thermoelastic Properties of Nanoparticles
Potato Starch Edible Films as Environmentally Friendly Carriers for Model Drug: In vitro Release Study