Notice (8): Trying to get property of non-object [APP/Controller/ArticlesController.php, line 201]
Notice (8): Trying to get property of non-object [APP/Controller/ArticlesController.php, line 203]
Rapid Synthesis And Photoluminescent Characterization Of MAl2O4: Eu2+, Dy3+ (M = Ca/Ca + Ba/Ca + Mg) blue Nanophosphors For White Lighting Display Applications

Cover Page January-2016-Advanced Materials Letters

Advanced Materials Letters

Volume 7, Issue 1, Pages 47-53, January 2016
About Cover


Rapid Synthesis And Photoluminescent Characterization Of MAl2O4: Eu2+, Dy3+  (M = Ca/Ca + Ba/Ca + Mg) blue Nanophosphors For White Lighting Display Applications

Devender Singh1*, 2, Vijeta Tanwar1, Anura P. Simantilke2, Bernabe Mari3,  Pratap S. Kadyan1 and Ishwar Singh1

1Department of Chemistry, Maharshi Dayanand University, Rohtak 124001, India

2Centro de Fisica, Universidade of Minho, Braga 4710057, Portugal

3Departament de Física Aplicada, Universitat Politècnica de València, València 46022, Spain

Adv. Mater. Lett., 2016, 7 (1), pp 47-53

DOI: 10.5185/amlett.2016.6103

Publication Date (Web): Dec 22, 2015

E-mail: devjakhar@gmail.com

Abstract

The persistent MAl2O4:Eu2+, Dy3+ (M may be Ca or Ca+Ba or Ca+Mg) blue light emitting nanophosphors were prepared by rapid facile gel combustion technique. For the syntheses of present series of phosphors, urea was used as an organic fuel and boric acid was used as a flux in presence of air. Photoluminescence properties were studied by excitation and emission spectra. The phosphors showed blue luminescence (λmax= 454-458nm) under the excitation of UV source, attributed to 4f65d1→4f7 transitions of the Eu(II) ion. The effect on photoluminescence intensity and decay time was also studied for varying metal ions in different ratio (Ca or Ca+Ba or Ca+Mg). The existence of divalent europium ions in the synthesized lattices was confirmed by the X-ray photoelectron spectroscopy. The crystal phase and size of the prepared materials were analyzed with X-ray diffraction patterns. The surface morphology of phosphors was studied with scanning electron microscopy and transmission electron microscopy techniques revealed the average size of the prepared materials between the 30-50 nm. The prepared nanophosphors had bright optoelectronic properties that could be efficiently applied in various solid state white light emitting display devices. 

Keywords

Persistent phosphor, divalent europium, aluminate, photoluminescence property, combustion technique.

Current Issue

Current Global Scenario of Electric Vehicles


Review on Detection of Phenol in Water 


Investigating the Machinability of Metallic Matrix Composites Reinforced by Carbon Nanotubes: A Review


Photocatalytic ZnO based PES Membranes for AOP Water Treatments under UV and Sunlight


Plasma Activated Water as a Source of Nitrogen for Algae Growth


Digital Light Processing (DLP) 3D Printing of Polyethylene Glycol (PEG) Biopolymer, Commercially available Ultra-High and Tough (UHT) Resin and Maghemite (γ-Fe2O3) Nanoparticles Mixture for Tissue Engineering Scaffold Application


Fabrication of Nanoparticle Embedded Polymeric Microbeads as an Efficient Drug Delivery System


Micro/Nanostructured Papers from Bagasse Pulp Reinforced by Nanofibrillated Cellulose from different Agro-Waste Sources


Structural, Optical and Magnetic Properties of Pristine, (Mn, Al) co-doped ZnO Nanocrystallites Synthesized via co-Precipitation Method


Nanosecond Laser Surface Patterning of Ti6Al4V Bio-alloy for Improved Biological Performance


Synthesis of Cu2O/Ag Composite Nanocubes with Promising Photoluminescence and Photodegradation Activity over Methylene Blue Dye


Locally available Clays of Bangladesh as a Replacement of imported Clays for Ceramic Industries 


Green Synthesis and Characterization of Silver Nanoparticles using Cassia auriculata Leaves Extract and Its Efficacy as A Potential Antibacterial and Cytotoxic Effect


Previous issues

Wearable Healthcare Devices

Nano-Graphene and Its Derivatives for Fabrication of Flexible Electronic Devices: A Quick Review

Natural Fibers as Viable Sources for the Development of Structural, Semi-Structural, and Technological Materials – A Review

Geometrical Characterization of Wire-and-Arc Additive Manufactured Steel Element

Plasma Activated Water Generation and its Application in Agriculture

Development of Advanced Electrode Materials on Porous Silicon for Micropower Formic Acid-Oxygen Fuel Cells 

Water Management within Tragacanth gum-g-polyitaconic Acid Hydrogels

Synthesis and Characterization of Humic Acid-coated Fe3O4 Nanoparticles for Methylene Blue Adsorption Activity

Synthesis and characterization of thermally stable flame retardant thermoplastic polyphosphazenes

Synthesis of Rod-coil Molecules bearing Oligo-Phenylene Vinylene Motifs: Effect of PEO Chain Lengths on the Evolution of Nanostructures Morphology and their Photophysical Properties

Dielectric Properties of Cu based Polymeric Composites in X-band of Microwave Frequency

Critical Association Concentration of Dansyl-Poly (acrylic acid) Synthetized by Redox Polymerization Followed by an Esterification in Aqueous Solution: Spectrophotometric and Tensiometric Studies

Influence of Iron Doping on Structural and Optical Properties of Nickel Oxide Nanoparticles

Upcoming Congress

Knowledge Experience at Sea TM