Combustion synthesis of X3.5Mg0.5Si3O8Cl4 (X3.5 = Sr,Ba):Eu2+ blue emitting phosphors
N.S. Dhoble1, V.B. Pawade2, S.J. Dhoble3*
1Department of Chemistry, Sevadal Mahila Mahavidyalaya, Nagpur 440009, India
2Department of Applied Physics, VNIET, Nagpur 440023, India
3Department of Physics, RTM Nagpur University, Nagpur 440033, India
Adv. Mater. Lett., 2011, 2 (5), pp 327-330
DOI: 10.5185/amlett.2011.3070am2011
Publication Date (Web): Apr 08, 2012
Copyright © 2019 VBRI Press
E-mail: sjdhoble@rediffmail.com
Eu2+ luminescence in novel Sr3.5Mg0.5Si3O8Cl4 and Ba3.5Mg0.5Si3O8Cl4 phosphors is reported in this paper. These were synthesized by combustion method at 550oC furnace temperature. The prepared phosphors shows PL emission spectra at 445 nm, due to 4f65d1→ 4f7 transition of Eu2+ ions by monitoring excitation at 358 nm for Sr and Ba host lattice. Phase purity was checked by using XRD-pattern. The prepared phosphors have potential applications for solid-state lighting purpose.
Cloud Medicine set to Revolutionize Doorstep Personalized Healthcare
Various surfactants for 0 – 3 dimensional nanocarbons: Separation, exfoliation and solubilization
Polypyrrole based biofunctional composite layer for bioelectrocatalytic device system
Innovative Graphene-PDMS sensors for aerospace applications
Effect of hot drawing process and carbonization temperature in electrochemical behavior of electrospun carbon nanofibers
Chemical Reactivity and Electronical Properties of Graphene and Reduced Graphene Oxide on Different Substrates
Laser Raman micro-spectroscopy as an effective non-destructive method of detection and identification of various sp2 carbon modifications in industry and in nature
Electrochemical promotion of ammonia synthesis with proton-conducting solid oxide fuel cells
Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity
Enhancement the properties of high and low-density polyethylene membranes by radiation grafting process
Synthesis of 9-Aminoacridine and its Application as an Anode Material for Aqueous Rechargeable Lithium–ion Batteries
Facile synthesis of novel tough and highly flexible biodegradable membranes for water microfiltration
Investigating the possibility of using acetic acid in place of HF in chromium-benzenedicarboxylates (MIL-53 and MIL-101) synthesis applicable for CO2 adsorption
Smart Healthcare pulls up Clouds for Virtual Medicine
Selecting the correct electromagnetic inspection technology
Influence of railway-track grinding on the track material condition and tribological behaviour
Micromechanical Fatigue Modelling of the Size Effect in Micro-Scale 316L Stainless Steel Specimens
Functionalization of Graphene and Reduced Graphene Oxide in Different Matrices
Effect of parasitic polytypes on ballistic electron transport in chemical vapor deposition grown 6H-SiC epitaxial layers
Photomemristive heterostructures based on two-dimensional crystals
Architecture - behaviour - properties relationship in Star-shaped MPA-PMMA and MPA-PS hyper-branched copolymers
Graphene and doped graphene: A comparative DFT study
Ag2CO3 / Magnetic reduced graphene oxide nanocomposite as advanced visible light photocatalytic hybrid materials for efficient degradation of azo dye
Optimization of acid hydrolysis process for the preparation cellulose nanofibrils
Alginate/k-carrageenan and alginate/gelatin composite hydrogel beads for controlled drug release of curcumin
Study of microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel
Copyright ©2010-2019 VBRI Press
Full Article