Effect Of Heavy Ion Irradiation At Low Temperature In Fe-14Cr-0.2Ti-0.3Y2O3
Sruthi Mohan, S. Balaji, S. Amirthapandian*, C. David, B.K. Panigrahi
Material Physics Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu, India
Adv. Mater. Lett., 2015, 6 (5), pp 442-445
DOI: 10.5185/amlett.2015.5732
Publication Date (Web): May 05, 2015
Copyright © 2019 VBRI Press
E-mail: pandian@igcar.gov.in
Fe-14Cr-0.2Ti-0.3Y2O3, ODS alloy samples are irradiated with 880 keV Fe+ ions at 230 K and 300 K upto a damage of 40 dpa at the surface. Transmission electron microscopy studies reveal a reduction in sizes of oxide dispersions in the ion irradiated alloys as compared to the as-prepared specimens; with greater diminution for samples irradiated at 230 K. Although the ion irradiation conditions (stage III) are favorable for vacancies to couple with solute atoms to cause precipitate growth, it is shown that such effects are less pronounced here and the ballistic effects dominate to cause oxide particle dissolution.
Oxide dispersion, strengthened steel, heavy ion irradiation, transmission electron microscopy.
Cloud Medicine set to Revolutionize Doorstep Personalized Healthcare
Various surfactants for 0 – 3 dimensional nanocarbons: Separation, exfoliation and solubilization
Polypyrrole based biofunctional composite layer for bioelectrocatalytic device system
Innovative Graphene-PDMS sensors for aerospace applications
Effect of hot drawing process and carbonization temperature in electrochemical behavior of electrospun carbon nanofibers
Chemical Reactivity and Electronical Properties of Graphene and Reduced Graphene Oxide on Different Substrates
Laser Raman micro-spectroscopy as an effective non-destructive method of detection and identification of various sp2 carbon modifications in industry and in nature
Electrochemical promotion of ammonia synthesis with proton-conducting solid oxide fuel cells
Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity
Enhancement the properties of high and low-density polyethylene membranes by radiation grafting process
Synthesis of 9-Aminoacridine and its Application as an Anode Material for Aqueous Rechargeable Lithium–ion Batteries
Facile synthesis of novel tough and highly flexible biodegradable membranes for water microfiltration
Investigating the possibility of using acetic acid in place of HF in chromium-benzenedicarboxylates (MIL-53 and MIL-101) synthesis applicable for CO2 adsorption
Smart Healthcare pulls up Clouds for Virtual Medicine
Selecting the correct electromagnetic inspection technology
Influence of railway-track grinding on the track material condition and tribological behaviour
Micromechanical Fatigue Modelling of the Size Effect in Micro-Scale 316L Stainless Steel Specimens
Functionalization of Graphene and Reduced Graphene Oxide in Different Matrices
Effect of parasitic polytypes on ballistic electron transport in chemical vapor deposition grown 6H-SiC epitaxial layers
Photomemristive heterostructures based on two-dimensional crystals
Architecture - behaviour - properties relationship in Star-shaped MPA-PMMA and MPA-PS hyper-branched copolymers
Graphene and doped graphene: A comparative DFT study
Ag2CO3 / Magnetic reduced graphene oxide nanocomposite as advanced visible light photocatalytic hybrid materials for efficient degradation of azo dye
Optimization of acid hydrolysis process for the preparation cellulose nanofibrils
Alginate/k-carrageenan and alginate/gelatin composite hydrogel beads for controlled drug release of curcumin
Study of microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel
Copyright ©2010-2019 VBRI Press
Full Article