1Department of Polymer Science, Bhaskaracharya College of Applied Sciences, University of Delhi, New Delhi 110 075, India
2Research and Technology Development Centre, Sharda University, Greater Noida, 201 306, India
Adv. Mater. Lett., 2015, 6 (2), pp 172-178
Publication Date (Web): Feb 08, 2015
Copyright © IAAM-VBRI Press
Copper is widely used in different industries and found its significant loss during the manufacturing and processing. The lost Cu is discharged in the effluent, thus adsorption of heavy metals is an important technology for treatment of wastewater containing different types of selected heavy metals. In this study, nanosize (~95 nm) zinc oxide was prepared through KNO3-NaNO3 eutectic melt at 450 °C. The obtained ZnO was encapsulated in urea-formaldehyde (UF) resin during acid catalysed polymerization process. The characterization of ZnO and ZnO-UF were made by X- ray diffraction (XRD), Scanning electron microscope (SEM) and Infra red spectroscopic (FT-IR) techniques. The prepared ZnO encapsulated in urea-formaldehyde resin casted in the form of film (~0.5 mm thickness) was used to remove 80% Cu (II) content from aqueous solution in 15 minutes. Further, the adsorption process was investigated and data was explained with Langmuir adsorption isotherm model.
Nanocomposite, eutectic melts, Cu removal, isotherm model.