Effect Of Laser And Visible Light Irradiation On Structural And Optical Properties Of Thin Films Of Amorphous Selenium And Selenium Mercury (80:20 Composition)

Shabir Ahmad, Mohsin Ganaie, Mohd. Shahid Khan, M. Zulfequar*

Department of physics, Jamia Millia Islamia, New Delhi 110025, India

Adv. Mater. Lett., 2014, 5 (9), pp 511-519

DOI: 10.5185/amlett.2014.590

Publication Date (Web): Sep 07, 2014

E-mail: mzulfe@rediffmail.com

Abstract


This study is carried out the effect of laser and solar light irradiation on the structural and optical properties of amorphous Selenium and selenium mercury (80:20 composition). Bulk samples were prepared by thermal quenching technique and thin films were papered by thermal evaporation technique on glass substrates. Thin films of a-Se and a-SeHg were irradiated by diode laser (wavelength=405nm, power=100mW) and solar light (energy ~ 0.3MeV calculated by E =hc/λ) for different durations of time. XRD analysis of a-Se and a-SeHg show increase of peak intensity and crystallite size after irradiation indicates the enhancement of crystallinity. Raman analysis of a-Se and a-SeHg also favors this improvement of crystallinity after laser and solar light irradiation. The UV analysis shows the value of optical band gap of a-Se and a-SeHg decreases after irradiation (both laser and solar light). Also it was found that the value of Urbach’s energy decreases after laser and solar light irradiation indicates that the disorder has been reduced after irradiation. The other optical parameters like extinction coefficient and absorption coefficient changes accordingly discussed in this study. It was also found that the change of structural and optical parameters is much more in case of solar light irradiation.

Keywords

Thin films of amorphous selenium and selenium mercury, solar and laser irradiation, structural and optical properties

Current Issue

Advanced Materials Congress Celebrating 10th Years of Establishment


Secure Management of Networked Batteries for Building Integrated Photovoltaics (BIPV) Systems  


The Cause of 100-year Low Carbonated Concrete of the Bridge 


Organic Montmorillonite Intercalated Nano-composites Prevent Post-Surgical Associated Infections


Morphology/tensile Performance Relationship for LLDPE/PP Double Gated Injected Blends


Preparation and Characterization of Nickel Ferrite Nanoparticles via Sol-gel Method


Nitrogen-doped Diamond Nanowire Gas Sensor for the Detection of Methane


Manufacture of Functional Open-cell Al Foams with Recycled Al Scraps using NaCl Ball Space Holder 


Vilsmeier-Haack Transformations under Non Classical Conditions


New Application of Highly Vesicular Basalt from Jabel Isbil Volcano (Dhamar-Rada'a Volcanic Field), Yemen


An Assessment of Tribological Characteristics under different Operating Condition


Functional Bi Coatings as A Perspective Material for Radiation Shields Production against Electron Radiation


Effects of Silica Modified NiFe2O4 on the Dielectric and Electrical Properties of NiFe2O4 filled Poly (methyl methacrylate) Composites


Previous issues
The Journey of a Decade to Advancing Materials Are the Electrospun Polymers Polymeric Fibers? Mechanical and Thermal Properties of Composite Material and Insulation for a Single Walled Tank for Cryogenic Liquids Prediction of Long-Term Behavior for Dynamically Loaded TPU Investigation of Doped Titanium Dioxide in Anatase Phase. Study ab initio using Density Functional Theory Comparison between Single Al2O3 or HfO2 Single Dielectric Layers and their Nanolaminated Systems Preparation of Stable and Optimized Antibody-gold Nanoparticle Conjugates for Point of Care Test Immunoassays Resonance-Based Temperature Sensors using a Wafer Level Vacuum Packaged SOI MEMS Process Integrated System Based on the Hall Sensors Incorporating Compensation of the Distortions The Efficacy of Cinnamomum Tamala as a Potential Antimicrobial Substance against the Multi-Drug Resistant Enterococcus Faecalis from Clinical Isolates The Effect of Complexing Reagent on Structural, Electrical and Optical Properties of CuS Thin Film Laser Cladding of Fluorapatite Nanopowders on Ti6Al4V Preparation and Evaluation of Sulfonate Polyethylene Glycol Borate Ester as a Modifier of Functional Properties of Complex Petroleum Lithium Grease

Upcoming Congress

Knowledge Experience at Sea TM