Department of Mechanical Engineering, Ambala College of Engineering and Applied Research, Devsthali, Ambala, India
Adv. Mater. Lett., 2013, Current Issue, 4 (7), pp 567-572
DOI: 10.5185/amlett.2012.11475
Publication Date (Web): May 01, 2013
Copyright © IAAM-VBRI Press
E-mail: satnam.mmu@gmail.com
Composites are one of the most advanced and adaptable engineering materials. The strength of any composite depends upon volume/weight fraction of reinforcement, L/D ratio of fibers, orientation angles and other factors. The present work focuses on determination of mechanical properties of pure epoxy and random oriented glass fiber (mat) reinforced epoxy at 10% and 20% weight fractions of glass fibers. The test specimens were prepared and tested according to ASTM standards. The experimental results revealed that with increase in weight fraction of reinforcement, the tensile strength and flexural strength increased by 14.5 % and 123.65% for 20 % glass reinforced composites over pure epoxy. The numerical results obtained were in good agreement to the experimental results. However increased reinforcement increases the brittleness of material which may results in low impact strength. This study further can be used to optimize the weight fraction of glass fibers, to achieve a combination of strength without compromising the impact strength of composites.
Fiber reinforced plastic, polymer composites, tensile strength, flexural strength, finite element analysis, weightfraction.
Water and Sanitation Management: During and after COVID-19 Pandemic
Polymeric Energy Materials: Development and Challenges
Influence of Different Copolymer Based Compatibilizers on Performance of Pristine and Recycled PP/PE blends
Bio Ceramics: New Material from Mangrove Bark
Hybrid Physical Chemical Vapour Deposition (HPCVD) of Superconducting MgB2 Thin Films on three Dimensional Copper Substrates
Photoinduced Electron Transfer Reactions of tris(4,4’-dimethoxy-2,2’-bipyridyl)ruthenium(II)cation with Quinones in Aqueous Medium
A Comparative Study of Green Synthesized AgNPs using Carissa Carandas and Nerium indicum Leaves and its Activities against Selected Human Pathogens and MCF 7 Cell
Design and Modelling of Carbon Fiber Grid Structure based Carbon/Epoxy Composites for Enhanced Microwave Absorbing Properties
Elaboration and Characterization of Macroporous Bioceramics using Polymeric Sponge Replication Method
Advanced Healthcare Biomaterials
Piezoelectric Alternative Energy Sources as a Part of the Global Energy Concerns – Future Prospects in the Science and Market
Rectify the Injury-Induced Microenvironment Imbalance in Peripheral Nerve Repair
A Mini Review on Biodegradable Magnesium Alloy Vascular Stent
Prospective Applications of Marine Oriented Materials in the Repair of Peripheral Nerve Injury
Design and Implementation of Dynamic FPAA Based Interface Circuit for Thin Film Lead-Free Piezoelectric Sensors
An Аpproach for Nanostructuring of Piezoelectric Materials by Template-assisted Growth in Porous Aluminum Oxide
Study of Sputtered Barium Strontium Titanate Films for Energy Harvesting Applications
The Effect of Bias on Properties of DLC Coatings for Artificial Joints
Fabrication of Tens-micron-sized Functionalized Polystyrene Microspheres for Utilization in Chiral Drug Isolation
Copyright ©2010-2020 VBRI Press
Full Article