1Institute of Materials Science and Technology (INTEMA), CONICET-University of Mar del Plata, Colón 10850, 7600 Mar del Plata, Argentina
2Institute for Polymers and Composites (IPC/I3N), University of Minho, Campus de Azurém, 4800-058 Guimaraes, Portugal
Adv. Mater. Lett., 2021, 12 (4), 21041618
DOI: 10.5185/amlett.2021.041618
Publication Date (Web): Feb 01, 2021
Copyright © IAAM-VBRI Press
E-mail: pettarin@fi.mdp.edu.ar
Carbon nanotubes are currently added to polymers to avoid extra-stages in the electrostatic painting process. However, the attained particle network after processing a final part could affect the mechanical properties and thermal stability of nanocomposites. It is then important to evaluate not only the functional properties, but also the overall performance of these pieces. In this work, boxes of polypropylene (PP) modified with multi-walled carbon nanotubes (MWCNT) were injection molded. Morphology induced by processing was characterized at different locations of the moldings to correlate the influence of in-homogeneities and flow pattern with the overall performance of the molded boxes. PP/MWCNT presented a better aesthetic quality and a markedly better thermal stability than pure PP. It was confirmed that the nanocomposite has high dielectric permittivity, low dielectric losses and relatively good DC conductivity. Regarding mechanical properties, MWCNT induced a slight improvement in flexural elastic modulus. Although fracture initiated at practically the same loading levels for both materials, the propagation energy was deteriorated by MWCNT presence. Differences in both electrical and mechanical behavior were found trough out the PP/MWCNT pieces as result of distinct MWCNT orientation and distribution. It was then concluded that processing has a great influence on parts performance.
Injection molding, dielectric properties, mechanical properties, fracture behaviour, structure-property relations
Progress and Perspectives of Photodetectors Based on 2D Materials
Synthesis and Characterization of Platinum and Platinum based Alloy Nanoparticles Anchored on Various Carbon Materials for Methanol Oxidation in a DMFC – A Short Review
Inhibitive Effect on the Rate of Hydrolysis of Tetracaine by the Surfactant-Coated Magnetic Nanoparticles (Fe3O4)
Multi-Energy System Based on Ocean Thermal Energy Conversion
Synthesis of Nitrogen-doped KTaTeO6 with Enhanced Visible Light Photocatalytic Degradation of Methylene Blue
Structural Evolution and Enhanced Energy Density, Ferroelectric Property Investigation in Gd Substituted NBT – BT Lead Free Ferroelectric Ceramics
Designing of 10 Wt. % Graphite Particulate Hot Forged AA7075 Composites and its Loss Factor Analysis
Positron Annihilation Spectroscopy of Basaltic Rocks from Plio-Qaternary Volcanics, Sana’a-Amran Volcanic Field, Yemen
Perspectives on Published Energy Sources and Smart Energy Supplies
State of Art Review on Nanobubbles
Eggshell Membrane Assisted CdS Nanoparticles for Manganese Removal in Water Treatment
Green Chemistry Synthesis of Nano-Hydroxyapatite using Natural Stabilisers
Structural, Optical and Electrical Properties of CaSnO3 and Ca0.98Nd0.02Sn0.98Ti0.02O3 Synthesized using Sol-Gel Method
Phase Change Materials Reinforced with Aluminium Foam for Latent Heat Storage
Influence of Manganese and Copper Doping on Structural and Optical Properties of Chromium Oxide Nanoparticles
Understanding of intriguing metal to semiconductor transition in Ni0.5Zn0.5Fe2O4 nanoparticulates
Flaw Resistance and Mode - I Fracture Energy Redistribution in Bamboo - A Correlation
Copyright ©2010-2021 VBRI Press
Full Article