Deformation Texture Modelling by Mean-Field and Full-Field Approaches

Jurij J. Sidor1,* and Qingge Xie2

1Eötvös Loránd University (ELTE), Faculty of Informatics, Savaria Institute of Technology, Károlyi Gáspár tér 4, Szombathely, 9700, Hungary

2Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing, 100083, China

Adv. Mater. Lett., 2019, 10 (9), pp 643-650

DOI: 10.5185/amlett.2019.0030

Publication Date (Web): Jun 18, 2019



An analysis on modeling the rolling textures in Al alloy by means of mean-field and full-field approaches is presented in the current contribution. The mean-field simulations were performed by the Taylor-type homogenization approach, called Alamel model, which takes into account a short-range interaction between the grains in a polycrystalline system. In order to account for the intra-grain deformation phenomena, the crystal elasto-visco-plastic finite-element model was employed. The method of strain path approximation on the quality of texture prediction was likewise discussed. The deformation history was calculated with different analytical approaches and a finite element model with isotropic mechanical properties, which accounted for various degree of accuracy. It was shown that the analytical approximations accoupled with the crystal plasticity model employed are capable of carrying out texture simulations close to the one performed with the crystal plasticity model with the deformation history obtained by means of the finite element model. Comparison of modelled and experimental textures as well as analysis of qualitative texture indicators suggest that an improvement in texture simulation can be achieved by considering heterogeneities of deformation flow across the thickness and taking into account the inhomogeneous nature of deformation inside each grain. © VBRI Press.


Al alloy, Texture, Crystal plasticity modelling, Alamel model

Current Issue
The Journey of a Decade to Advancing Materials
Are the Electrospun Polymers Polymeric Fibers?
Mechanical and Thermal Properties of Composite Material and Insulation for a Single Walled Tank for Cryogenic Liquids
Prediction of Long-Term Behavior for Dynamically Loaded TPU
Investigation of Doped Titanium Dioxide in Anatase Phase. Study ab initio using Density Functional Theory
Comparison between Single Al2O3 or HfO2 Single Dielectric Layers and their Nanolaminated Systems
Preparation of Stable and Optimized Antibody-gold Nanoparticle Conjugates for Point of Care Test Immunoassays
Resonance-Based Temperature Sensors using a Wafer Level Vacuum Packaged SOI MEMS Process
Integrated System Based on the Hall Sensors Incorporating Compensation of the Distortions
The Efficacy of Cinnamomum Tamala as a Potential Antimicrobial Substance against the Multi-Drug Resistant Enterococcus Faecalis from Clinical Isolates
The Effect of Complexing Reagent on Structural, Electrical and Optical Properties of CuS Thin Film
Laser Cladding of Fluorapatite Nanopowders on Ti6Al4V
Preparation and Evaluation of Sulfonate Polyethylene Glycol Borate Ester as a Modifier of Functional Properties of Complex Petroleum Lithium Grease

Upcoming Congress

Knowledge Experience at Sea TM