PtSn/C electrocatalysts modified with Ni and Ga for the ethanol electrooxidation   

Giordano T. Paganoto, Josimar Ribeiro*

Departamento de Química, Centro de Ciências Exatas, Universidade Federal do Espírito Santo, Av. Fernando Ferrari, 514, CEP.: 29075-910, Vitória, Espírito Santo, Brazil

Adv. Mater. Lett., 2018, 9 (12), pp 895-901

DOI: 10.5185/amlett.2018.1875

Publication Date (Web): Sep 14, 2018

E-mail: joagrothur@yahoo.com.br

Abstract


Ni and Ga elements are inexpensive compared to the Pt. Ni and NiOx have been recognized to have potential applications in ethanol electrooxidation. For these reasons and based on previous results obtained with Ga addition on Pt-based electrocatalysts we have investigated the PtSn/C electrocatalysts modified with Ni and Ga. The PtSnNiGa/C electrocatalysts were characterized in acidic medium by electrochemical techniques and by physicochemical techniques such as: X-ray diffraction; Energy dispersive X-ray spectroscopy; Transmission electron microscopy. Based on the TEM analyses, the PtSnNiGa/C electrocatalysts show average particle sizes range between 3.6 – 5.5 nm, which is consistent with XRD data. The ethanol oxidation on the PtSnNiGa/C electrocatalysts occurs at lower potentials as compared to the Pt/C. The higher current normalized by Pt mass (2.62 Ag-1Pt), lower susceptibility to poisoning anodic and charge transfer resistance (245 Ω) were obtained for the Pt45Sn22Ni21Ga12/C electrocatalyst.The current normalized by Pt mass: Pt50Sn26Ni12Ga12/C (2.8 Ag-1Pt); Pt45Sn22Ni21Ga12/C (2.62 Ag-1Pt); Pt52Sn21Ni18Ga9/C (1.63 Ag-1Pt) and Pt43Sn23Ni11Ga22/C (1.27 Ag-1Pt) electrocatalysts are higher compared to binary catalysts with high Pt content. The promotion effect of PtSnNiGa/C to ethanol electrooxidation can be explained by the modification structural of Pt by incorporation of Sn, Ni and/or Ga to the face-centered cubic crystalline of Pt.

Keywords

Ethanol oxidation reaction, gallium, platinum, fuel cells, quaternary electrocatalysts.

Current Issue
The Journey of a Decade to Advancing Materials
Are the Electrospun Polymers Polymeric Fibers?
Mechanical and Thermal Properties of Composite Material and Insulation for a Single Walled Tank for Cryogenic Liquids
Prediction of Long-Term Behavior for Dynamically Loaded TPU
Investigation of Doped Titanium Dioxide in Anatase Phase. Study ab initio using Density Functional Theory
Comparison between Single Al2O3 or HfO2 Single Dielectric Layers and their Nanolaminated Systems
Preparation of Stable and Optimized Antibody-gold Nanoparticle Conjugates for Point of Care Test Immunoassays
Resonance-Based Temperature Sensors using a Wafer Level Vacuum Packaged SOI MEMS Process
Integrated System Based on the Hall Sensors Incorporating Compensation of the Distortions
The Efficacy of Cinnamomum Tamala as a Potential Antimicrobial Substance against the Multi-Drug Resistant Enterococcus Faecalis from Clinical Isolates
The Effect of Complexing Reagent on Structural, Electrical and Optical Properties of CuS Thin Film
Laser Cladding of Fluorapatite Nanopowders on Ti6Al4V
Preparation and Evaluation of Sulfonate Polyethylene Glycol Borate Ester as a Modifier of Functional Properties of Complex Petroleum Lithium Grease

Upcoming Congress

Knowledge Experience at Sea TM