1Graduate School of Education, Hiroshima University, Higashi-Hiroshima, 739-8524, Japan
2National Institute of Technology, Tokuyama College, Shunan, 745-8585, Japan
Adv. Mater. Lett., 2018, 9 (7), pp 476-480
DOI: 10.5185/amlett.2018.2053
Publication Date (Web): Jun 14, 2018
Copyright © IAAM-VBRI Press
E-mail: tsutaok@hiroshima-u.ac.jp
Low frequency plasmonic (LFP) state induced by the electrical percolation of metallic particles has been investigated for metal granular composite materials containing Cu, Ni47Fe53 and Co50Fe50 microparticles. In these composites, a conductivity jump due to electrical percolation takes place at different particle volume fraction j; a conductive state is established above the percolation threshold jC. The jC is 0.16 for Cu, 0.61 for Ni47Fe53, and 0.76 for Co50Fe50 composites, respectively. In the Cu composite, the LFP state takes place in the conductive state just above jC. However, in the Ni47Fe53 composite, the LFP state is established at j = 0.90; the LFP state couldn’t be observed in the Co50Fe50 one. Hence, a non-plasmonic conductive state can exist in the percolated state; the LFP state can be established in the conductive state with about 1.0 S/cm of the conductivity value.
Metal granular composite, low frequency plasmonic state, permittivity, conductivity.
Water and Sanitation Management: During and after COVID-19 Pandemic
Polymeric Energy Materials: Development and Challenges
Influence of Different Copolymer Based Compatibilizers on Performance of Pristine and Recycled PP/PE blends
Bio Ceramics: New Material from Mangrove Bark
Hybrid Physical Chemical Vapour Deposition (HPCVD) of Superconducting MgB2 Thin Films on three Dimensional Copper Substrates
Photoinduced Electron Transfer Reactions of tris(4,4’-dimethoxy-2,2’-bipyridyl)ruthenium(II)cation with Quinones in Aqueous Medium
A Comparative Study of Green Synthesized AgNPs using Carissa Carandas and Nerium indicum Leaves and its Activities against Selected Human Pathogens and MCF 7 Cell
Design and Modelling of Carbon Fiber Grid Structure based Carbon/Epoxy Composites for Enhanced Microwave Absorbing Properties
Elaboration and Characterization of Macroporous Bioceramics using Polymeric Sponge Replication Method
Advanced Healthcare Biomaterials
Piezoelectric Alternative Energy Sources as a Part of the Global Energy Concerns – Future Prospects in the Science and Market
Rectify the Injury-Induced Microenvironment Imbalance in Peripheral Nerve Repair
A Mini Review on Biodegradable Magnesium Alloy Vascular Stent
Prospective Applications of Marine Oriented Materials in the Repair of Peripheral Nerve Injury
Design and Implementation of Dynamic FPAA Based Interface Circuit for Thin Film Lead-Free Piezoelectric Sensors
An Аpproach for Nanostructuring of Piezoelectric Materials by Template-assisted Growth in Porous Aluminum Oxide
Study of Sputtered Barium Strontium Titanate Films for Energy Harvesting Applications
The Effect of Bias on Properties of DLC Coatings for Artificial Joints
Fabrication of Tens-micron-sized Functionalized Polystyrene Microspheres for Utilization in Chiral Drug Isolation
Copyright ©2010-2020 VBRI Press
Full Article