Effects of C60 film coating on the electrochemical performance of composite LiCoO2 cathodes for lithium secondary batteries

Arenst Andreas Arie1* , Joong Kee Lee2

1Department of Chemical Engineering, Parahyangan Catholic University, Ciumbuleuit 94 Bandung 40141, Indonesia

2Advanced Energy Materials Processing Laboratory, Energy Storage Center, Korea Institute of Science and Technology, Hwarangno 14-gil 5, Seongbuk-gu, Seoul 136-791, Korea

Adv. Mater. Lett., 2018, 9 (2), pp 138-141

DOI: 10.5185/amlett.2018.6408

Publication Date (Web): May 16, 2018

E-mail: arenst@yahoo.com

Abstract


In this work, LiCoO2(LCO) composite electrodes were coated by fullerene C60 thin film with different thickness of 60, 100 and 200 nm using a plasma thermal evaporation technique. The surface morphology of bare and coated samples was observed by scanning electron microscope (SEM). The electrochemical characteristics of the coated electrodes as cathode materials in Lithium-Ion Batteries (LIB)were investigated by a galvanostatic charge-discharge test at various C-rates between 3.0 and 4.5 V and compared with those of uncoated samples. An improvement of the performances of the coated electrodes in terms of higher initial coulombic efficiency, higher capacity retention and better rate capability was shown by the 60 nm thick C60 coated LiCoO2 electrodes. It can be said that the thin C60 coating layer can minimize the dissolution of Co from the electrode to the electrolyte. As the thickness of coating layer was increased, the coated electrodes show a more severe capacity fade due to longer Li-ion diffusion path.

Keywords

LiCoO2, fullerene, coating, cathodes, lithium battery.

Current Issue

Celebrating 10th Years of Diamond Open Access Publishing in Advanced Materials  


Cerebral Oxygenation Studies Through Near Infrared Spectroscopy: A Review


Analysis of Fine Sulfoaluminate Cement by Strength and Thermogravimetric Analysis


Characterization of the Interfacial Surface Energy for Composite Electrical Conduction Measurements using Two Full Range Percolation Threshold Models


Quantitative Detect of Fatigue of Membrane of Erythrocyte in Uniform Shear Field


Ecofriendly-developed Polyacrylic Acid-coated Magnetic Nanoparticles as Catalysts in Photo-fenton Processes


Evaluation of Drug Interactions with Medications Prescribed to Ambulatory Patients with Metabolic Syndrome in Urban Area


Fiber-reinforced Cementitious Composite: Sensitivity Analysis and Parameter Identification 


Evaluation of Drug Utilization Patterns Based on World Health Organization Drug use Indicators at Outpatients Clinics


Are Quantitatively Micro-machined Scaffolds Effective for Cell Technology?


Synthesis and Characterization of Gold Nanoparticles from Lobelia Nicotianifolia Leaf Extract and its Biological Activities


Advanced Oxidations of Tartrazine Azo-dye


Antifungal Activity of Salvia jordanii Against the Oral Thrush Caused by the Cosmopolitan Yeast Candida albicans among Elderly Diabetic Type 2 patients


Previous issues

Advanced Materials Congress Celebrating 10th Years of Establishment

Secure Management of Networked Batteries for Building Integrated Photovoltaics (BIPV) Systems  

The Cause of 100-year Low Carbonated Concrete of the Bridge 

Organic Montmorillonite Intercalated Nano-composites Prevent Post-Surgical Associated Infections

Morphology/tensile Performance Relationship for LLDPE/PP Double Gated Injected Blends

Preparation and Characterization of Nickel Ferrite Nanoparticles via Sol-gel Method

Nitrogen-doped Diamond Nanowire Gas Sensor for the Detection of Methane

Manufacture of Functional Open-cell Al Foams with Recycled Al Scraps using NaCl Ball Space Holder 

Vilsmeier-Haack Transformations under Non Classical Conditions

New Application of Highly Vesicular Basalt from Jabel Isbil Volcano (Dhamar-Rada'a Volcanic Field), Yemen

An Assessment of Tribological Characteristics under different Operating Condition

Functional Bi Coatings as A Perspective Material for Radiation Shields Production against Electron Radiation

Effects of Silica Modified NiFe2O4 on the Dielectric and Electrical Properties of NiFe2O4 filled Poly (methyl methacrylate) Composites

Upcoming Congress

Knowledge Experience at Sea TM