Adv. Mater. Lett., 2011, 2 (2), pp 113-117
DOI: 10.5185/amlett.2010.12217
Publication Date (Web): Apr 08, 2012
Copyright © IAAM-VBRI Press
Superplastic deformation behaviors of a relatively coarse-grained AZ80 magnesium alloy sheet have been investigated at temperature ranging from 350 to 430 °C and at the strain rates ranging from 1.31 × 10-4 to 1.31 × 10-2 s-1by uniaxial tensile tests. Superplasticity with the maximum elongation to failure of 239% was obtained at 430 °C and the strain rate of 6.56 × 10-4 s-1 and its strain rate sensitivity exponent, the value of m is high up to 0.49. Fine interior dynamic recrystallized (DRX) grains distributed along primary grains were observed during superplastic deformation, but primary grains were not found significantly grown up. In addition, micro-cavities and their coalescences were also observed in the superplastic deformation of the relatively coarse-grained AZ80 magnesium alloy sheet. Grain boundary sliding (GBS) was considered to be the main deformation mechanism during the superplastic deformation. Dislocation creep controlled by atom diffusion through interior DRX and primary grains is suggested mainly to accommodate the GBS in superplastic deformation. © 2011 VBRI press.
Advanced Materials Research and Innovation Priorities for Accomplishing the Sustainable Development Goals
Contemporary Advances in Humidity Sensing Materials, Methods, and Performances
Roles of the Debye Length and Skin Depth in the Characterization of Space Charge Interactions in Semiconductor Nanoparticles
Antifungal Activity of Iron-gold and Cobalt-gold co-doped ZnO Nanoparticles
Adsorption and Thermodynamic Parameters of Activated Carbon-Diazepam Systems in Simulated Gastric Fluid
Synthesis, Impedance and Current-Voltage Spectroscopic Characterization of Novel Gadolinium Titanate Nano Structures
Removal of Toxic Dyes from Industrial Waste Water using Chitosan Grafted Itaconic Acid Nanocomposites
Structural, Optical and dielectric properties of Sr doped LaVO4
Design, 3D Development and Finite Element Analysis of Cylindrical Mesh Cage Bioimplants from Biometals
Advancements in Materials Technology for Accomplishing Sustainable Development Goals
A Review for Luminescence Property of Materials, Its Detection and Probabilities for Embedding of Luminescence with MEMS Technology
A Review on Low-Cost Adsorbents for Cadmium Pollutant Removal from Industrial Effluents
Study of Applications of Radial Basis Function Network in Forecasting
Simulation of LPG Pressure Vessel under Fire Engulfment
Strength Analysis of Friction Stir Welding (FSW) Joint Under Minimize Rotation Speed of FSW Tool
Formation of Pure In2O3 pallets for OLED Application
Study of Soil Nitrogen Level and Splitting on Nutrient Uptake around the Industries of Chhattisgarh, India
Copyright ©2010-2021 VBRI Press
Full Article