Cover Page December-2017-Advanced Materials Letters

Advanced Materials Letters

Volume 8, Issue 12, Pages 1178-1183, December 2017
About Cover


Graphenated ceramic nanofibers for highly sensitive simultaneous detection of dopamine, uric acid and ascorbic acid

Masoud Taleb1, Irina Hussainova1, 2, 3*, Roman Ivanov1, Iwona Jasiuk3

1Tallinn University of Technology, Department of Materials Engineering, Ehitajate 5, Tallinn, Estonia

2ITMO University, Kronverksky 49, St. Petersburg, Russian Federation

3University of Illinois at Urbana-Champaign, Department of Mechanical Science and Engineering, Urbana, IL 61801, USA

Adv. Mater. Lett., 2017, 8 (12), pp 1178-1183

DOI: 10.5185/amlett.2017.1557

Publication Date (Web): Sep 08, 2017

E-mail: irina.hussainova@ttu.ee

Abstract

The present study reports the simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA) in 0.1 M phosphate buffer solution (pH = 7.0) using a novel electrode material prepared from oxide ceramic nanofibers by applying a single step chemical vapor deposition method. Electron-transfer kinetics at the electrode/solution interface was studied by standard redox reaction of 5 mM Fe(CN)63-/4- in 1 M KCl. Electrochemical and sensing measurements such as cyclic voltammetry and differential pulse voltammetry were performed to detect DA and UA in the presence of AA. The developed electrode was shown to separate the overlapping voltammetric responses of three analytes into the individual voltammetric peaks, totally eliminate the interference from AA, and distinguish DA from UA. Linear relationship was observed between current intensities and concentrations of all three compounds, and the limits of detection (LOD) were reached 0.57 µM, 0.77 µM and 0.84 µM for DA, UA and AA, respectively. The electrode of graphenated nanofibers displayed a very good reproducibility and stability, and was successfully tested for detection of DA, UA and AA in real urine samples. 

Keywords

Graphene, ascorbic acid, dopamine, uric acid, voltammetry.

Current Issue

Cloud Medicine set to Revolutionize Doorstep Personalized Healthcare


Various surfactants for 0 – 3 dimensional nanocarbons: Separation, exfoliation and solubilization


Polypyrrole based biofunctional composite layer for bioelectrocatalytic device system


Innovative Graphene-PDMS sensors for aerospace applications 


Effect of hot drawing process and carbonization temperature in electrochemical behavior of electrospun carbon nanofibers


Chemical Reactivity and Electronical Properties of Graphene and Reduced Graphene Oxide on Different Substrates


Laser Raman micro-spectroscopy as an effective non-destructive method of detection and identification of various sp2 carbon modifications in industry and in nature


Electrochemical promotion of ammonia synthesis with proton-conducting solid oxide fuel cells


Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity


Enhancement the properties of high and low-density polyethylene membranes by radiation grafting process


Synthesis of 9-Aminoacridine and its Application as an Anode Material for Aqueous Rechargeable Lithium–ion Batteries


Facile synthesis of novel tough and highly flexible biodegradable membranes for water microfiltration


Investigating the possibility of using acetic acid in place of HF in chromium-benzenedicarboxylates (MIL-53 and MIL-101) synthesis applicable for CO2 adsorption


Previous issues

Smart Healthcare pulls up Clouds for Virtual Medicine

Selecting the correct electromagnetic inspection technology 

Influence of railway-track grinding on the track material condition and tribological behaviour

Micromechanical Fatigue Modelling of the Size Effect in Micro-Scale 316L Stainless Steel Specimens

Functionalization of Graphene and Reduced Graphene Oxide in Different Matrices

Effect of parasitic polytypes on ballistic electron transport in chemical vapor deposition grown 6H-SiC epitaxial layers

Photomemristive heterostructures based on two-dimensional crystals

Architecture - behaviour - properties relationship in Star-shaped MPA-PMMA and MPA-PS hyper-branched copolymers

Graphene and doped graphene: A comparative DFT study

Ag2CO3 / Magnetic reduced graphene oxide nanocomposite as advanced visible light photocatalytic hybrid materials for efficient degradation of azo dye

Optimization of acid hydrolysis process for the preparation cellulose nanofibrils

Alginate/k-carrageenan and alginate/gelatin composite hydrogel beads for controlled drug release of curcumin

Study of microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel

Upcoming Congress

Knowledge Experience at Sea TM