1Computer Mathematics, Institute of Computer Science, Czestochowa University of Technology, Al. Armii Krajowej 17, 42-201 Czestochowa, Poland
2Magnets, Tele and Radio Research Institute, Ratuszowa 11 Street, 03-450 Warszawa, Poland
Adv. Mater. Lett., 2017, 8 (6), pp 689-694
DOI: 10.5185/amlett.2017.1441
Publication Date (Web): Apr 30, 2017
Copyright © IAAM-VBRI Press
E-mail: ksokalski76@gmail.com
A novel algorithm for designing the values of the technological parameters for the production of soft magnetic composites (SMCs) was created. These parameters are the hardening temperature T and the compaction pressure p. These parameters enable us to optimize the power losses and magnetic induction. The advantage of the presented algorithm lies in bi-criteria optimization. The crucial role played by the presented algorithm is scaling, pseudo equation of state and fixed point. On this basis, mathematical models of power losses and magnetic induction were created. The model parameters were calculated on the basis of the power loss characteristics and hysteresis loops. The created optimization system was applied to specimens of Somaloy500. The obtained output consists of a finite set of feasible solutions. To select a unique solution, an additional criterion was formulated.
Soft magnetic composites, power losses, magnetic induction, bi-criteria optimization.
Water and Sanitation Management: During and after COVID-19 Pandemic
Polymeric Energy Materials: Development and Challenges
Influence of Different Copolymer Based Compatibilizers on Performance of Pristine and Recycled PP/PE blends
Bio Ceramics: New Material from Mangrove Bark
Hybrid Physical Chemical Vapour Deposition (HPCVD) of Superconducting MgB2 Thin Films on three Dimensional Copper Substrates
Photoinduced Electron Transfer Reactions of tris(4,4’-dimethoxy-2,2’-bipyridyl)ruthenium(II)cation with Quinones in Aqueous Medium
A Comparative Study of Green Synthesized AgNPs using Carissa Carandas and Nerium indicum Leaves and its Activities against Selected Human Pathogens and MCF 7 Cell
Design and Modelling of Carbon Fiber Grid Structure based Carbon/Epoxy Composites for Enhanced Microwave Absorbing Properties
Elaboration and Characterization of Macroporous Bioceramics using Polymeric Sponge Replication Method
Advanced Healthcare Biomaterials
Piezoelectric Alternative Energy Sources as a Part of the Global Energy Concerns – Future Prospects in the Science and Market
Rectify the Injury-Induced Microenvironment Imbalance in Peripheral Nerve Repair
A Mini Review on Biodegradable Magnesium Alloy Vascular Stent
Prospective Applications of Marine Oriented Materials in the Repair of Peripheral Nerve Injury
Design and Implementation of Dynamic FPAA Based Interface Circuit for Thin Film Lead-Free Piezoelectric Sensors
An Аpproach for Nanostructuring of Piezoelectric Materials by Template-assisted Growth in Porous Aluminum Oxide
Study of Sputtered Barium Strontium Titanate Films for Energy Harvesting Applications
The Effect of Bias on Properties of DLC Coatings for Artificial Joints
Fabrication of Tens-micron-sized Functionalized Polystyrene Microspheres for Utilization in Chiral Drug Isolation
Copyright ©2010-2020 VBRI Press
Full Article