November, 2018, Current Issue

Volume 9, Issue 11, Pages 748-830, November 2018

Multilayer ceramics as integration platform for sensors in in-vitro cell culture reactors

Heike Bartsch, Martin Baca, Uta Fernekorn, Marcel Himmerlich, Jens Müller, Andreas Schober, Hartmut Witte

Volume 9, Issue 11, Page 748-752, Year 2018 | DOI: 10.5185/amlett.2018.2090

Behavior of EB FRP masonry bond under service temperature

Zuhair Al-Jaberi, John J. Myers, K. Chandrashekhara

Volume 9, Issue 11, Page 753-759, Year 2018 | DOI: 10.5185/amlett.2018.2152

Magnetism of ACFs and superfluidity of 4He adsorbed in ACFs

Yoshiyuki Shibayama

Volume 9, Issue 11, Page 760-766, Year 2018 | DOI: 10.5185/amlett.2018.2129

Joule heating of logs for phytosanitary purposes and timber processing pre-treatment

William J.B. Heffernan, Nurzhan Nursultanov, Ryan van Herel, Thomas Smart

Volume 9, Issue 11, Page 767-775, Year 2018 | DOI: 10.5185/amlett.2018.2133

Design of FES based muscle stimulator device using EMG and insole force resistive sensors for foot drop patients

Muhammad A. Khan, Saad Abdullah, Mauro Serpelloni, Emilio Sardini

Volume 9, Issue 11, Page 776-780, Year 2018 | DOI: 10.5185/amlett.2018.2170

Structure and properties degradation of the nuclear graphite under neutron irradiation

Boris A. Gurovich, Denis A. Kuleshov, Dmitriy A. Maltsev, Oleg K. Chugunov, Alexey S. Frolov, Yaroslav I. Shtrombakh

Volume 9, Issue 11, Page 781-788, Year 2018 | DOI: 10.5185/amlett.2018.2132

Structural performance of severely damaged reinforced concrete beams after SRP repair

Hayder H. Alghazali, Zuhair K. Al-Jaberi1, Zena R. Aljazaeri, John J. Myers

Volume 9, Issue 11, Page 789-795, Year 2018 | DOI: 10.5185/amlett.2018.2153

Polycaprolactone/organoclay biodegradable nanocomposites: Dissimilar tendencies of different clay modifiers

Romina P. Ollier, Matias R. Lanfranconi, Vera A. Alvarez, Leandro N. Ludueña

Volume 9, Issue 11, Page 796-804, Year 2018 | DOI: 10.5185/amlett.2018.1828

Synthesis and characterization of pure BiFeO3 using various complexing agents by Sol-gel method

Balesh Kumar Vashisth, Jarnail S. Bangruwa, S. P. Gairola and Vivek Verma

Volume 9, Issue 11, Page 805-810, Year 2018 | DOI: 10.5185/amlett.2018.2173

Effect of sulfurization temperature on optical and compositional properties of sputtered Zn(O,S) thin films

K.S. Gour, A.K. Yadav, Rahul Kumar, J.S. Tawale and V.N. Singh

Volume 9, Issue 11, Page 811-815, Year 2018 | DOI: 10.5185/amlett.2018.2125

Staking lay-up effect on dynamic compression behaviour of E-Glass/epoxy composite materials: Experimental and numerical investigation

Mostapha Tarfaoui, Mourad Nachtane

Volume 9, Issue 11, Page 816-822, Year 2018 | DOI: 10.5185/amlett.2018.2060

Naphthol bis-indole derivative as an anode material for aqueous rechargeable lithium ion battery

R. Anil Kumar, R. Vijeth Shetty, G. S.Suresh, K. M. Mahadevan

Volume 9, Issue 11, Page 823-830, Year 2018 | DOI: 10.5185/amlett.2018.2007

October, 2018 Previous Issue

Volume 9, Issue 10, Pages 665-747, October 2018

Recent advances in nanofibers fabrication and their potential applications in wound healing and regenerative medicine

Doaa M. Ragab and Nazik A. Elgindy

Volume 9, Issue 10, Page 665-676, Year 2018 | DOI: 10.5185/amlett.2018.1856

Hydrogen concentration behavior of y - grooved weld joint based on a coupled analysis of heat transfer - thermal stress - hydrogen diffusion

Go Ozeki, A. Toshimitsu Yokobori, Jr., Toshihito Ohmi, Tadashi Kasuya, Nobuyuki Ishikawa, Satoshi Minamoto, Manabu Enoki

Volume 9, Issue 10, Page 677-683, Year 2018 | DOI: 10.5185/amlett.2018.2160

Radiation engineered copper nanoparticles immobilised catalytic reactor (Cu-NICaR) system

Swarnima Rawat, Nilanjal Misra, Virendra Kumar, Shubhangi Atmaram Shelkar, Narender Kumar Goel, Rakesh Kumar Singhal, Lalit Varshney

Volume 9, Issue 10, Page 684-691, Year 2018 | DOI: 10.5185/amlett.2018.2123

Design of a novel three arm electrothermal microgripper with multiple degrees of control

Muaiyd H. M. Al-Zandi and Changhai Wang

Volume 9, Issue 10, Page 692-695, Year 2018 | DOI: 10.5185/amlett.2018.2072

Composites of AISI 316L stainless steel and nanocrystalline Ti-B-C ceramic powders

Slawomir M. Kaczmarek, Tomasz Bodziony, Vinh H. Tran, Piotr Figiel, Anna Biedunkiewicz, Grzegorz Leniec

Volume 9, Issue 10, Page 696-702, Year 2018 | DOI: 10.5185/amlett.2018.2161

Effect of reaction time on LiMn2O4 nanostructures prepared by modified chemical bath deposition method

Lehlohonolo F. Koao, Setumo V. Motloung, Tshwafo E. Motaung

Volume 9, Issue 10, Page 703-707, Year 2018 | DOI: 10.5185/amlett.2018.2137

Visible light responsive TiO2 nanotubes synthesized by electrochemical anodization method

Elizabeta Stojcheva, Metka Ben?ina, Ita Junkar, Tomaž Lampe, Matjaz Valant, Veronika Kralj-Igli?, Aleš Igli?

Volume 9, Issue 10, Page 708-714, Year 2018 | DOI: 10.5185/amlett.2018.2024

Impact of infrared radiation on oxide layer of ultrathin TiNi-based alloy wire

Gunther Sergey, Chekalkin Timofey, Hodorenko Valentina, Kang Ji-hoon, Kim Ji-soon, Gunther Victor

Volume 9, Issue 10, Page 715-720, Year 2018 | DOI: 10.5185/amlett.2018.1821

Enhancing absorption in thin film organometal trihalide perovskite solar cell by photon recycling

Abhinav Bhatnagar and Vijay Janyani

Volume 9, Issue 10, Page 721-726, Year 2018 | DOI: 10.5185/amlett.2018.2108

Reducing edge effect of temperature-field for large area thin film deposition in hot filament chemical vapor deposition system

Lin Li1, Shibing Tian, Ruhao Pan, Chao Wang, Chi Sun, Junjie Li, Changzhi Gu

Volume 9, Issue 10, Page 727-732, Year 2018 | DOI: 10.5185/amlett.2018.2146

Surface reinforcement of metals by carbon nanomaterials followed by high intense energy irradiation

Nuha Abusaif, Gregory S. Bocharov, Alexander V. Eletskii, Alexander V. Uvarov, Sergei D. Fedorovich

Volume 9, Issue 10, Page 733-736, Year 2018 | DOI: 10.5185/amlett.2018.2107

Redox-active cerium oxide based nanozyme abrogate the organophosphate mediated poisoning in mammalian cells

Kinjal D. Shah, Ragini Singh, Sanjay Singh

Volume 9, Issue 10, Page 737-747, Year 2018 | DOI: 10.5185/amlett.2018.1939

Most Cited Articles

Solid State Thermochromic Materials

Volume 1, Issue 2, Page 86-105, Year 2010

Surface Affinity Of Graphene For Health, Energy And Environmental Safety Applications

Volume 4, Issue 10, Page 721-736, Year 2013

Silver Nanoparticles: Preparation, Characterization, And Kinetics

Volume 2, Issue 3, Page 188-194, Year 2011

Carboxymethyl Chitosan And Its Applications

Volume 1, Issue 1, Page 11-33, Year 2010

Synthesis And Characterization Of Highly Crystalline Polyaniline Film Promising For Humid Sensor

Volume 1, Issue 2, Page 129-134, Year 2010

Room Temperature Ferromagnetism In ITO And Ni Doped ITO

Volume 7, Issue 11, Page 891-896, Year 2016

Zeolite 4A Filled Poly (3, 4-ethylenedioxythiophene): (polystyrenesulfonate) (PEDOT: PSS) And Polyvinyl Alcohol (PVA) Blend Nanocomposites As High-k Dielectric Materials For Embedded Capacitor Applications

Volume 7, Issue 12, Page 996-1002, Year 2016

New polycrystalline MC-reinforced nickel-based superalloys for use at elevated temperatures (T > 1100°C)


Volume 8, Issue 8, Page 866-872, Year 2017

Porous hydroxyapatite scaffolds fabricated from nano-sized powder via honeycomb extrusion

Volume 8, Issue 4, Page 377-385, Year 2017

Biosynthesis Of Silver Nanoparticles Using Murraya Koenigii (Curry Leaf): An Investigation On The Effect Of Broth Concentration In Reduction Mechanism And Particle Size

Volume 2, Issue 6, Page 429-434, Year 2011

Biological Approach Of Zinc Oxide Nanoparticles Formation And Its Characterization

Volume 2, Issue 4, Page 313-317, Year 2011

Titanium dioxide (TiO2) and silver/titanium dioxide (Ag/TiO2) thin films with self-cleaning properties

Volume 8, Issue 4, Page 444-448, Year 2017

Advanced Materials Letters

The official journal of the International Association of Advanced Materials (IAAM)