Full Article

Single Point Diamond Turning Of Silicon For Flat X-rays Mirrors

Neha Khatri, Rohit Sharma, Vinod Mishra, Harry Garg, Vinod Karar

Volume 2, Issue 7, Page 425-427, Year 2017 | DOI: 10.5185/amp.2017/704

Keywords: Silicon, single point diamond turning, surface roughness, x-ray mirror

Abstract: Silicon Mirrors are essential components for guiding the X-Ray beam and focusing it to a particular location. Due to lower X-ray wavelength, these mirrors require super smooth surface finish to avoid the strong scattering from surface. Single Point Diamond Turning is used to examine the fabrication possibility of X-Ray mirror. A number of machining cuts are performed with parameters like tool feed rate, Spindle Speed and depth of cut. The surface is characterized by mechanical profiler, optical profiler, Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). The optimized surface roughness achieved is 0.873 nm. Copyright © 2017 VBRI Press.

Advanced Materials Proceedings

The official journal of the International Association of Advanced Materials (IAAM)